JVC KD-MX2900R manual Remote Operations, Installing the battery

Page 43

REMOTE OPERATIONS

(With an optionally purchased remote controller)

We recommend that you use remote controller RM-RK31 with your unit. The followings are the instructions for using RM-RK31.

ENGLISH

Before using the remote controller:

•Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between.

•Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).

Remote sensor

Installing the battery

When the controllable range or effectiveness of the remote controller decreases, replace the battery.

 

1. Remove the battery holder.

(back side)

 

1) Push out in the direction indicated by the arrow

1)

 

using a ball point pen or a similar tool.

 

2)

2) Remove the battery holder.

Lithium coin battery

2.

Place the battery.

(product number:

 

Slide the battery into the holder with the + side facing

CR2025)

 

 

upwards so that the battery is fixed in the holder.

 

 

 

3. Return the battery holder.

(back side)

 

Insert again the battery holder pushing it until you

 

 

hear a clicking sound.

WARNING:

• Store the batteries in a place which children cannot reach.

If a child accidentally swallows the battery, immediately consult a doctor.

•Do not recharge, short, disassemble or heat the batteries or dispose of in a fire. Doing any of these things may cause the batteries to give off heat, crack or start a fire.

•Do not leave the batteries with other metallic materials.

Doing this may cause the batteries to give off heat, crack or start a fire.

•When throwing away or saving the batteries, wrap in tape and insulate; otherwise, it may cause the batteries to give off heat, crack or start a fire.

•Do not poke the batteries with tweezers or similar tools.

Doing this may cause the batteries to give off heat, crack or start a fire.

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Instructions KD-MX2900RPosition And Reproduction Of Labels PrecautionsContents CD Changer Operations Basic Operations 1Turn on the powerAdjust the volume Adjust the sound as you want see pages 28Start searching a station Radio Basic OperationsListening to the radio Select the band FM1, FM2, FM3 or AMStoring stations in memory FM station automatic preset SSMPress and hold both buttons for more than 2 seconds See page 6 to tune into a station Manual presetSelect the FM1 band Tune into a station of 88.3 MHzSelect the band FM1, FM2, FM3 or AM you Tuning into a preset stationSelect the number 1 6 for the preset station you want Selecting FM reception soundWhat you can do with RDS EON RDS OperationsMode TA Standby Reception Using Standby ReceptionPTY Standby Reception Selecting Your Favorite Programme for PTY Standby Reception Finish the settingSearching Your Favorite Programme To store your favorite programme types To search your favorite programme type Last selected PTY code and preset number appearChanging the display mode while listening to an FM station Other convenient RDS functions and adjustmentsAutomatic clock adjustment Setting the TA volume levelDescriptions of the PTY Codes PTY codesInsert a CD into the loading slot CD OperationsPlaying a CD Open the control panelPlaying a CD Text Select text display mode while playing a CD TextTo go to a particular track directly Locating a track or a particular portion on a CDTo fast-forward or reverse the track To go to the next tracks or the previous tracksTo play back tracks at random Random Play Selecting CD playback modesTo play back tracks repeatedly Repeat Play Again for more than To cancel the prohibition and unlock the CD, pressProhibiting CD ejection To play back only intros Intro ScanTo stop play and eject the MD MD OperationsPlaying an MD Insert an MD into the loading slotLocating a track or a particular portion on an MD You can play back all tracks on the MD at random Selecting MD playback modesProhibiting MD ejection To cancel the prohibition and unlock the MD, pressIndication For Preset values Sound AdjustmentsSelecting preset sound control modes Call up the sound control mode you wantIndication To do Range Adjusting the soundSelect the item you want to adjust Adjust the levelMode you selected flashes on the display Storing your own sound adjustmentsOther Main Functions Setting the clockBasic Procedure Changing the general settings PSMPress SEL Select when the setting is complete Selecting the clock display Selecting 24-hour or 12-hour clockSelecting the level display Controlling the volume automatically Audio Cruise Mode Selecting the dimmer modeYou can select the proper cruise mode for your car If Audio Cruise does not function correctly To adjust the volume increase rateSelecting the telephone muting Adjusting the contrast levelTurning on or off the key-touch tone Scroll Once Scroll Auto Scroll OFF Selecting the scroll modeSeconds while pressing Disp Assigning names to the sourcesSources Maximum number of the characters Select a character Select the character set you want while is flashingTo erase the input characters Small letters Numbers and symbolsAvailable characters Capital lettersUnlock the control panel How to detach the control panelHow to attach the control panel Detaching the control panelWith an optionally purchased remote controller Installing the batteryRemote Operations Selected disc starts playing Using the remote controllerFunctions the same as Functions as the Band button while listening to the radioPlaying CDs CD Changer OperationsSelect the CD automatic changer To show the CD Text information To go to a particular disc directlyMode RPT Indicator Plays repeatedly Mode RND Indicator Plays at randomMode Indication Plays the beginnings 15 seconds DAB Tuner Operations Tuning into an ensemble and one of the servicesSelect the DAB tuner To tune in a particular ensemble without searching Select a service you want to listen toTo restore the FM/AM tuner Start searching an ensembleTune into an ensemble you want Storing DAB services in memorySelect the DAB tuner Select the DAB band DAB1, DAB2, or DAB3 you wantSelect a service of the ensemble you want Select the number 1 6 for the preset DAB service you want Tuning into a preset DAB serviceTo turn up Volume To turn down the volumeSelect the external component Turn on the connected device and start playing the sourceAbout mistracking MaintenanceHandling Discs Taking care of CDsMoisture condensation Taking care of MDsSymptoms Causes Remedies TroubleshootingLW Tuner SpecificationsFM Tuner MW TunerSiehe Seite Zurücksetzen des Geräts Refer to page of How to reset your unitZie de pagina met de paragraaf Het apparaat terugstellen

KD-MX2900R specifications

The JVC KD-MX2900R is a versatile and feature-rich car stereo designed to enhance your in-car audio experience. This model combines stylish design with modern technology, making it an excellent choice for music lovers on the go.

One of the standout features of the KD-MX2900R is its compatibility with a variety of audio formats. It supports MP3, WMA, and WAV playback, allowing users to enjoy their favorite tracks from different source devices. The stereo is equipped with a front USB input, which not only allows for easy connectivity to USB flash drives but also enables direct connection to smartphones and other portable music devices. This functionality is complemented by the Bluetooth feature that supports hands-free calling and audio streaming, ensuring that you can enjoy your music and stay connected while driving.

The KD-MX2900R boasts a user-friendly interface, highlighted by its large, clear display. The 13-segment LCD screen offers easy readability even in bright sunlight, making it simple to navigate through tracks and settings. The rotary knob and well-placed buttons enhance the usability of the stereo, allowing for straightforward operation without distractions.

Another significant characteristic of the JVC KD-MX2900R is its customizable equalizer settings. With a built-in 3-band equalizer, users can tweak the audio output to suit their musical preferences or the acoustics of their vehicle. Additionally, the unit features preamp outputs, which can be used for connecting additional amplifiers, enhancing the overall sound quality.

The KD-MX2900R also includes a variety of sound enhancement features such as Loudness, which boosts the lower frequencies at lower volumes, and a High-Pass Filter for optimizing sound clarity. For those who enjoy radio, the stereo has an AM/FM tuner with a maximum of 18 preset stations, ensuring you have access to your favorite channels without hassle.

Installation is straightforward, with a standard DIN size that fits in most vehicle dashboards. The unit's durability and reliable performance make it a long-lasting automotive audio solution.

Overall, the JVC KD-MX2900R offers an impressive combination of features and technologies, making it an ideal choice for drivers seeking high-quality sound and modern connectivity options. Whether you're commuting, on a road trip, or simply running errands, this car stereo delivers a rich audio experience that enhances any journey.
Top Page Image Contents