Maytag MAF9501 operating instructions Water intake error, Door opening error

Page 17

Water intake error

If F4 is flashing in the display.

Fault with water supply. Check:

-that the tap on the water pipe is open.

-that the filter in the machine’s water intake is not blocked.

1. Shut off the water tap.

2. Unscrew the hose.

3. Clean the filter in the intake valve on the machine.

4. Screw the hose back on.

5. Turn on the tap.

6. Run the programme again to check if the fault is fixed.

7. If the fault remains, call the service divi- sion.

If F6 is flashing in the display, call the service division.

Image 17

Contents Operating Instructions Washing Machine Contents Transport protection Before using your machine for the first timePacking material Washer doorSafety instructions Keep an eye on children Child safetyAutomatic door opening Detergent compartment Parts of the washing machineOptions buttons Front panelAdvice and tips before washing Economy and efficiency Wool and silkArtificial fibres and synthetic fibres Sort your laundry WashingSelect programme Programme chartTemperature Select options and settingsDelayed Start Spin speed/No spin8Once the programme has finished 7Close the door and press the Start/Stop buttonTime remaining To add or remove washing after the programme startsChecking the filter and drainage pump Care and cleaningCleaning the outside of the machine Do as follows Rinse holes under the agitatorIf you have hard water Error messages TroubleshootingWasher door will not open Machine will not startDoor opening error Water intake errorStandard tests Technical dataTechnical information Transport protection Adjusting the feet InstallationPositioning the washing machine Connection to water supplyConnection on delivery Electrical installationProgramme plate in multiple languages Before contacting the service division ServiceSearch words Washing Quick guideLoad the laundry Detergent compartment