Washing sequence
Water inlet
Wash
Wash timer
(To set to below 2 minute, first set to 6 minute then turn it back. it can increase the service life of the timer).
OFF ¹Ø Ë¿
| ë |
15 | 3 |
126
ÃÞ
9Âé
WASH TIMER
Wash selector |
| Spin timer |
(standard current, | (to set | to below 1 minute, |
strong current) | first set to 2 minute then | |
| turn it back. it can increase | |
| the service life of the timer). | |
STRONG |
| OFF |
STANDARD | 5 | 1 |
| ||
| DRAIN |
|
| 4 | 2 |
|
| 3 |
WASH SELECTOR
SPIN TIMER
1. Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 1)
Run washing program for some time to stir and dissolve the powder completely.
Figure 1
2.Put in the laundries. If the water quantity is insufficient, please add water.
STRONG 
STANDARD 
DRAIN
WASH SELECTOR
Figure 2
3.Select the current.
Select the strength of the current according to the laundries. (Figure 2)
4.Select the washing time
Select the washing time according to the laundries. (Figure 3)
| OFF | Ë¿ |
| |
| ¹Ø |
| ||
|
| ë |
| |
15 |
| 3 |
| |
12 |
| 6 |
| |
| 9 | ÃÞ | Figure 3 | |
WASH TIMER | Âé | |||
| ||||
| STRONG |
|
| |
STANDARD |
|
|
|
5.After washing, set the "WASH SELECTOR" at "DRAIN". (Figure 4).
DRAIN
WASH SELECTOR
8
Figure 4