6 | Close the top lid | Using process | |||||
7 | Finish washing | STANDARD |
|
|
|
|
|
|
|
|
|
| |||
|
| GENTLE | |||||
The pulsator stops rotating
set the "WASH SELECTOR" at "DRAIN".
DRAIN
WASH SELECTOR
8 Disposal after washing
After using, please clean the lint and foreign materials of the lint filter and lint frame in time. Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
Cleaning the lint filter
The lint filter must be used during washing.
It must be cleaned in time after each using.
1. Take off the lint filter
Put hand at the indicated position. Push down to take it off. (See to Figure 1)
2. Clean the lint
Figure 1
Put it in water and clean while it is still wet.(See to Figure 2)
3. Install the lint filter |
|
|
| ||||
After cleaning, insert the bottom | of | Figure 2 | |||||
the | lint | filter (marked | with "down side") | ||||
| |||||||
into | the | filter | frame, | then push | the |
| |
upper part of | the filter in (marked with |
| |||||
"up side"). (See to Figure 3) |
|
| |||||
Figure 3
Attention: be sure not to confuse the direction.
Wipe the complete unit with soft cloth twisted dry.
Wipe with neutral detergent if too dirty. 
Do not wash it directly by water.
|
|
|
|
|
|
|
|
|
|
|
|
| Thinner |
| Alcohol |
| Petrol |
| |||||||||
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
After washing, dismount the water inlet hose. Pull off the power plug and hang up the power cord.
Do not store water in the tub for long period. Discharge the water immediately after each using.
Wipe off the water drops on the surface and inside the tub with clean soft cloth. Open the cover of the wash tub for some time (about one hour), then close it.
Hang up the drain hose.