Haier XPB60-113S user manual How to change the direction of the drain hoses

How to change the direction of the drain hoses

Figure 1 indicates the ex factory installation position of the drain hose.

Extend the drain hose from the side of spin tub.

Take off the drain hose from the hanging hole of the cabinet. Pull the drain hose fixing hook outwards gently to take out the drain hose from the two fixing hooks. (As per Figure 2)

Rotate the drain hose fixing hook for 90 to take it out from the installation hole (As per Figure 3).

Drain hose		Figure 1
fixing hook
Side sectional view
Drain hose	Fixing hook
fixing hook	installation hole
Pull outwards	Drain hose
slightly		Figure 2
Take off

the drain hose

Install	the	two	drain hose
fixing	hooks taken out into
the installation			hole at the
other side of the base frame
(to aim at the			installation	Rotate the fixing
				hook for 90
hole	accurately		you can
lean	the washing machine			Take off the fixing
forward slightly).Then rotate
				hook downwards
for 90 (As		per	Figure 4).

Figure 3

Pull the fixing hook outwards slightly. Inlay the drain hose into the fixing hooks reliably along the groove at spin tub side, and make it extend towards spin tub side.

Then hang the drain hose into the hanging hole at the spin tub side. (As per Figure 5).

Rotate the fixing

hook for 90 to fix it

Insert the fixing hook into the installation hole upwards

Figure 4

Figure 5

Extend the drain hose from the rear side

Take out the drain hose from the fixing hook. Extend it from the rear side (When

the drain hose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 6).

Figure 6

5