Haier XPB70-111S, XPB70-112S user manual Washing sequence

Washing sequence Water-filling selector handle

Overfilling sign

Wash timer		Wash selector			Water-filling entrance
(To set to below 2 minute,		(Strong current,						Buzzer
first set to 5 minute then		standard current)					(The buzzer will ring when
turn it back. it can increase
the service life of the timer).								the washing finishes)
	SILK		STRONG
	WOOL
		STANDARD
				DRAIN		OFF		MAX
	COTTON
	LINEN
						BUZZER
WASH TIMER		WASH SELECTOR

Spin timer

(To set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer).

OFF SILK

WOOL

SPIN TIMER

Wash

1.Water-filling selector

(1)Set the water-filling selector at the "WASH" side. (Figure 1)

(2)Set the water level adjusting lever to needed line.

2.Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2)

Run washing program for some time to stir and dissolve the powder completely.

WASH SPIN

STRONG

STANDARD

Figure 1

Figure 2

3.Put in the laundries. If the water quantity is insufficient, please add water.

WASH SELECTOR

DRAIN

Figure 3

4.Select the current.
Select the strength of the current according to	WASH TIMER OFF SILK
the laundries. (Figure 3)	WOOL
5.Select the washing time	Figure 4
Select the washing time according to the
	LINEN
	COTTON
laundries. (Figure 4)

6.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure 5).

STRONG

STANDARD

DRAIN

WASH SELECTOR

Figure 5

9