O K U P O P T I O N S | Polk Audio RM7200, RM4600, RM3600, RM3300

C O N N E C T I N G T H E S P E A K E R S T O Y O U R S Y S T E M (General Directions)

We recommend using two-conductor 16 gauge or thicker speaker wire. Strip 1/2 inch (12.7mm) of insulation from each of the two conductors to expose the bare metal and twist each of the individual conductors into single unfrayed strands. Note that one of the terminals on the rear of each speaker is red (+) and the other is black (–). Make certain that you connect the wire from the red (+) terminal of your amplifier or receiver to the red (+) terminal on your speaker and the wire from the black (–) terminal of your amplifier or receiver to the black (–) terminal on your speaker. Most wire has some indicator (such as color-coding, ribbing or writing) on one of the two conductors to help you maintain consistency. If your speakers sound “thin,” with little bass and little or no center image, chances are that one of the speaker wires is connected backwards. Double-check all connections.

U S I N G P U S H - T A B A N D 5 - W A Y B I N D I N G P O S T S

To connect wire to the push-tab connectors, push the plastic tab of one connector to open the hole. Insert the bare wire into the hole and release the plastic tab (Figure 6). Repeat this step with the other connectors.

To connect wire using the binding posts (Figure 7), unscrew the hex nut and insert the bare wire into the hole near the base of the binding post. Do not insert the insulated part of the wire into the hole as this will not give you a good connection. Twist the hex nut back down the binding post until it firmly meets the wire. Do not overtighten.

To Use Banana Plugs (US only): Carefully pry out the Binding Post Plugs (plastic plugs on the end of the binding posts) to expose Banana Plug holes. Insert Banana Plugs. (This is for US owners only.)

H O O K - U P O P T I O N S

The versatile RM7000 Series loudspeaker systems give you many hook-up options. The option that is best for you depends on your electronics and your personal taste. Here are the hookups we recommend for each system. (You may want to experiment to see what works best for you.)

A N I M P O R T A N T N O T E A B O U T S U B W O O F E R H O O K U P

For best sound, DO NOT USE THE “SUBWOOFER OUTPUT” OR LFE JACK ON YOUR RECEIVER TO CONNECT THE SUBWOOFER. The RM7200 and RM7600 Systems both feature a powered subwoofer that has a built-in, adjustable low pass filter to separate the low frequency signals (the bass) from the full range signal. The dedicated “subwoofer output” jacks (sometimes labeled “LFE” or “Low Frequency Effects”) on most receivers also contain a fixed low pass filter. If you connect the subwoofer to the receiver’s LFE Out jack, the two filters will interact and reduce the fidelity of your system. Follow the hook up and receiver set-up/bass management instructions below and all of the bass will go to the subwoofer, you will not lose any bass, and you will get the highest possible performance from your system. We promise.

You’ll find an informative article on “Bass Management and Subwoofer Connections” in the set up section at http://www.polkaudio.com/home/faqad/.

R M 7 2 0 0 H O O K U P O P T I O N S

OPTION 1—SPEAKER WIRE HOOKUP, OUR FAVORITE HOOKUP METHOD (Figure 8):

Using speaker wire, connect the left and right front speaker outputs of your receiver or amplifier to the “speaker level” (wire) inputs of the powered subwoofer.

Then, connect the left and right front satellite speakers with speaker wire from the “speaker level” outputs of the powered subwoofer.

Connect the Center Channel Speaker directly to the center channel output from your receiver.

Connect the Rear Surround Satellites directly to the rear or surround channel outputs from your receiver.

OPTION 2—LINE LEVEL HOOKUP, USED WITH ELECTRONICS THAT HAVE PRE-OUT JACKS FOR THE LEFT AND RIGHT FRONT CHANNELS (Figure 9)

Connect your front speakers to your receiver or amplifier in the normal way (Figure 8). If your pre-amp, processor, amplifier or receiver has a spare set of front left and right pre-outs, connect them to the Line Level “In” jacks of the subwoofer. Use well-shielded RCA cables. If your pre-amp, processor, amplifier or receiver has a single set of pre-outs and they are being used to deliver signal to an amplifier, use “Y” cables as shown in (Figure 9).

For accessories and information visit www.polkaudio.com 3

7600, RM7200, RM4600, RM3600, RM4300 specifications

Polk Audio has long been a key player in the audio industry, renowned for producing high-quality speakers and home theater systems. Among its notable product lineup are the RM series speakers, specifically the RM4300, RM3600, RM4600, RM7200, and RM3300 models. Each of these speakers boasts unique features and technologies that cater to audiophiles and casual listeners alike.

The RM4300 is a compact bookshelf speaker that delivers impressive sound quality in a small package. Its advanced driver technology includes a 5.25-inch Dynamic Balance driver, which provides a well-balanced response across frequencies. The speaker also features a 1-inch silk dome tweeter, ensuring clear and detailed highs. The RM4300 is designed for versatility, making it an excellent choice for both stereo and multi-channel setups.

The RM3600 is another high-performing bookshelf speaker, recognized for its exceptional detail and clarity. Its design includes a 6.5-inch Dynamic Balance driver paired with a 1-inch tweeter, resulting in enhanced bass performance and a smooth high-frequency response. The RM3600 is perfect for music lovers who appreciate rich sound with a clean presentation, making it suitable for various audio setups, from small rooms to larger spaces.

The RM4600 takes performance up a notch with its superior acoustic design. It features a more expansive 6.5-inch driver for deep, resonant bass, complemented by a 1-inch tweeter for precise treble. This model also includes Polk's patented PowerPort technology, which significantly reduces distortion while increasing bass response. The RM4600 is ideal for home theater enthusiasts seeking immersive audio experiences.

For those who desire a more robust surround sound configuration, the RM7200 serves as an outstanding floor-standing speaker. It incorporates dual 6.5-inch woofers alongside a 1-inch tweeter, delivering a strong, full-range sound that can fill larger rooms. The RM7200’s design emphasizes a wide soundstage, making it an excellent option for those looking to create an impactful home theater experience.

Finally, the RM3300 is engineered as a dedicated center channel speaker, ensuring dialog clarity and seamless integration with other RM series speakers. This model utilizes dual 5.25-inch drivers and a 1-inch tweeter, resulting in precise sound reproduction. The RM3300 is built with a focus on minimizing sound distortion, facilitating smoother transitions between channels during movie playback.

In summary, the Polk Audio RM series, including the RM4300, RM3600, RM4600, RM7200, and RM3300, offers a diverse selection of speakers designed for exceptional audio performance. Each model incorporates innovative technologies and driver configurations that appeal to both music enthusiasts and home theater aficionados, ensuring that Polk Audio remains a trusted name in home entertainment solutions.