Haier XQB55-10 user manual Disposal after washing

Page 16

Disposal after washing

After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine.

Please first pull off the power plug from the receptacle before cleaning.

When washing, lint filter must be used After using, please clean it in time.

Lint filter:

1.Pull upward to detach

2.Clean the lint

Put it in water and clean while it is still wet.

Clean

Figure 1

(See to Figure 1).

3.Press downward to assemble.

Dismantle

Dismantle Install Install

Figure 2

The filter screen of the water inlet valve is likely to be blocked by foreign materials and influence the water inlet. Please clean it

If the cabinet is dirty, wipe it with wet cloth

Do not flush it directly with water.

Wipe it with neutral detergent.

Do not wipe it with thinner, petrol,

alcohol etc.

hol Alco

Petrol

Thinner

1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).

2.Do not store water in the washing machine for a long period. Drain the water completely after each using. 3.Be sure to pull off the power plug before maintenance.

4.Hang up the power cord and drain hose.

5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour), then close the top lid.

14

Image 16
Contents 0030805169C Contents Meaning and description of the symbols Names of the partsSafety precautions Do not use water hotter above 50 CDismantle Installation and adjustment Adjust the installation positionHow to change the direction of the drain hose Usage of the drain hoseInstall the water inlet hose Confirm the water tapTake down the water inlet hose Preparation before washing Put down the drain hoseHow to use the whitener How to use the washing powderPut in the laundries Usage of the detergentUse the operation buttons Description of the function of the buttonsOperating procedure and explanations for the buttons Press the Power ON/OFF button to switch on the power supplySelection method of the procedure programs Close the top lid Finish washingPress the Water Level button to select suitable water level Press the start/pause buttonDisposal after washing Trouble shooting Answer to question Specification Packing list