Haier XQB100-96 user manual Preparation before washing Using process

1 Preparation before washing Using process

Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe.

3.Put down the drain hose.

Pay attention to followings before washing the laundries

Confirm	if	Clear the pocket.
there is special		Take	out the
requirement for		coins,	sand,
the laundries.		hairpins etc.

Fasten	the	The	quantity of
		the	laundries
buttons	and
		shall	not exceed
zippers.
		the	rated value.
		The big laundries
		like	the	jeans
		shall	be	put in
		loosely.

When the pulsator is running, the buttons of the l a u n d r i e s m a y

cause	noise.	For
t h e	s a k e	o f

discretion, please put the laundries with buttons into other laundries.

a. Please check if the laundries are applicable for washing. b. Separate those not colorfast from other laundries.

c. For laundries not water absorbing, please put them into water with hands.

d. For laundries with much soil, please remove the soil first. You can add detergent on the part with serious soil directly. It is much easier to remove the soil by that mean.

e. For laundries likely to get lint ball or with long fibre, please first turn the inside out before putting them into water.

f.Don't put the laundries polluted with chemicals directly into the washing machine.

g.For those small laundries, laundries likely to be twisted or be twisted or worn, and woolen Laundries, please put them into mesh bag before washing.