Haier XPB65-27QGS user manual How to change the direction of the drain hoses

Before Using

How to change the direction of the drain hoses

Figure 1 indicates the ex factory installation position of the drain hose.

Extend the drain hose from the side of spin tub.

Take off the drain hose from the hanging		Drain hose
			Figure 1
hole of the cabinet.	Pull the drain hose	fixing hook
fixing hook outwards	gently to take out

the	drain hose from the two fixing hooks.					Side sectional view
(As per Figure 2)
						Drain hose			Fixing hook
Rotate the drain hose fixing hook for 90						fixing hook			installation hole
									Drain hose
to take it out from the installation hole						Pull outwards
(As per Figure 3).						slightly
						Take off				Figure 2
Install		the two	drain hose			the drain hose
fixing		hooks taken out into
the installation			hole	at the
other side of the base frame
(to	aim at the		installation		Rotate the fixing			Rotate the fixing
hole		accurately you can
					hook for 90			hook for 90
lean		the washing machine							to fix it
forward slightly).Then rotate					Take off the fixing		Insert the fixing hook into the
for 90 (As per Figure 4).					hook downwards		installation hole upwards
Pull	the fixing		hook	outwards	slightly.	Figure 3				Figure 4
Inlay the drain hose into the fixing hooks
reliably along the groove at spin tub side,
and make it extend towards spin tub side.
Then hang the drain hose into the hanging
hole at the spin tub side. (As per Figure 5).
Extend the drain hose from the rear side										Figure 5

Take out the drain hose from the fixing hook. Extend it from the rear side (When

the drain hose is extended from the rear

side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 6).

Figure 6