Haier XPB58-113S user manual Disposal after washing, Cleaning the lint filter

Page 14

Disposal after washing

After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning.

Cleaning the lint filter

The lint filter must be used during washing. It must be cleaned in time after each using.

1.Take off the lint filter

Put hand at the indicated position.

Push down to take it off. ( See to

Figure 1)

2.Clean the lint

Put it in water and clean while it is

still wet.(See to Figure 2)

3. Install the lint filter

After cleaning, insert the bottom Figure 2 of the lint filter ( marked with

"down side") into the overflow filter , then push the upper part of the filter in ( marked with " up side "). (See to Figure 3)

Figure 1

Figure 3

Cleaning the overflow filter

Too much lint on the overflow filter will influence the normal usage of the machine. Please clean it every two months.

Elastic fixing

1 Take off the overflow filter.claw As indicated in the figure, nip the elastic fixing

claw and pull it to the direction of the arrow to take it off.

12

Image 14
Contents Twin-tub Washing Machine Contents Meaning and description of the symbols Names of the partsSafety precautions Petrol Installation and adjustment Install the lint filterHow to change the direction of the drain hoses Preparation before washing Pay attention to followings before washing the laundriesMusts in washing Usage of the detergentWashing sequence Midway spinning Rinsing Spinning Cleaning the lint filter Disposal after washingCleaning the overflow filter Trouble-shooting Answers to question When the remained water is frozenTrouble-shooting Answer to question Specification Packing list