Before Using
Adjust the installation position
The largest permitted slope of the bearing surface of the washing machine is 2. Slanting or uneven ground will cause unstable operation of the machine. Please check with following methods:
Hang a becket with weight to confirm if the washing machine is horizontal.
Install the water inlet hose ; Select the water level
Insert | the water inlet hose into the water water inlet hose |
| |||
inlet | jointer on the control | panel. |
|
|
|
(To dismantle the water inlet hose,you only |
| water inlet jointer | |||
need | to pull the hose out.) |
|
|
|
|
Fill the water to the water level selected |
|
|
| ||
according to the quantity of the laundries. | water level |
| |||
Attention: |
|
|
| ||
|
| indicator |
| ||
Put in the laundries first before |
|
|
| ||
water inlet. |
| Maximum |
|
| |
Do not exceed the "Max " water | about 43L |
| |||
Medium |
|
| |||
|
|
|
|
| |
level ( water level 3 ) , | otherwise | about 36L |
| ||
Minimum |
| ||||
the water may overflow out of the | about 30L |
| |
machine. |
|
|
|