How to change the direction of the drain hoses
Figure 1 indicates the ex factory installation position of the drain hose.
Extend the drain hose from the side of spin tub
Side sectional view
Drain hose | Fixing hook |
fixing hook | installation hole |
Take off the drain hose from the hanging hole of the cabinet. Pull the drain hose fixing hook outwards gently to take out the drain hose from the two fixing hooks. (As per Figure 2)
Rotate the drain hose fixing hook for 90 to take it out from the installation hole (As per Figure 3).
Install the two drain hose fixing hooks taken out into the installation hole at the other side of the base frame (to aim at the installation hole accurately you can lean the washing machine forward slightly).Then rotate for 90 (As per Figure 4).
Figure 1 | Drain hose |
fixing hook |
Rotate the fixing hook for 90
Pull outwards | Drain hose |
slightly |
|
Take off
the drain hose
Figure 2
Rotate the fixing
hook for 90 
to fix it
Pull the fixing hook outwards slightly. Inlay the drain hose into the fixing hooks reliably along the groove at spin tub side, and make it extend towards spin tub side.
Then hang the drain hose into the hanging hole at the spin tub side. (As per Figure 5).
Take off the fixing hook downwards 
Figure 3
Insert the fixing hook into the installation hole upwards
Figure 4
Extend the drain hose from the rear side
Take out the drain hose from the fixing hook. Extend |
|
it from the rear side (When the drain hose is extended |
|
from the rear side, it can be hung on the point for drain |
|
hose at the two sides of the cabinet.) (See to Figure 6). | Figure 6 |
Figure 5 |
Install the water inlet hose; Select the water level
Water inlet hose |
|
Insert the water inlet hose into the | Water inlet |
entrance on the control pane directly.(pull it |
|
out to dismantle it) |
|
Select water level according to the quantity of the laundries.
Water level indicator
Max
Maximum
Set the water level adjusting lever
Medium
Med
to needed line.
Minimum
Min
5