Cleaning the overflow filter
2.Take off the corrugation pipe. Dismantle the upper part of the
corrugation pipe inside the overflow filter ( as indicated in Figure 1).
3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water.
4. Install the overflow filter. |
| |
(1).Install the corrugation pipe. |
| |
(2).Insert the mounting plate at | Hook | |
the bottom of the filter into | ||
| ||
the valve cover. |
| |
(3).Hang up the hook at the left |
| |
upper side. |
| |
(4).Push the upper part in as |
| |
indicated in Figure 2. |
|
Water level adjusting lever
Corrugation
Pipe
Figure 1
Figure 2
Cleaning the protective cover
During washing clothes,must use protective cover Finished washing everytime ,please clean lint on the surface
Please clean lint under the protective cover termly
Cleaning method: | Down |
|
Push
1.Push as the figure ,take down the protective cover as the arrowhead way
13