Adjust the installation position

The largest permitted slope of the bearing surface of the washing machine is 2 . Slanting or uneven ground will cause unstable operation of the machine. Please check with following methods:

Hang a becket with weight to confirm if the washing machine is horizontal.

Install the water inlet hose ; Select the water level

Insert	the water inlet hose into the water
inlet	jointer on the control panel.

(To dismantle the water inlet hose, you only need to pull the hose out.)

Fill the water to the water level selected according to the quantity of the laundries. Attention:

Put in the laundries first before water inlet.

Do not exceed the "Max " water level otherwise the water may overflow out of the machine.

If the water level exceed the "Max " water level ,in order to protect the electrical component, the water flow over to the base from overflow pipe, flow out the washing machine.

water inlet hose

Water inlet enrtance

water level indicator