Cycles
NOTE: Not all cycles are available on all models.
Select the drying cycle that matches the type of load you are drying. See the Automatic Cycle Settings or Timed Cycle Settings chart.
Cycle Control knob
Automatic Cycles
Automatic Cycles allow you to match the cycle to the load you are drying. See the following Automatic Cycle Settings chart. Each cycle dries certain fabrics at the recommended temperature.
A sensor detects the moisture in the load and automatically adjusts the drying time for optimal drying. Press the DRYNESS button to adjust the default dryness level.
Automatic Cycle Settings
Automatic Cycles | Temperature | Est. |
Load Type |
| Cycle |
|
| Time |
|
| (Minutes) |
|
|
|
HEAVY DUTY | High | 40 |
Heavyweight items, towels, jeans |
|
|
|
|
|
ECO NORMAL | Medium | 35 |
Designed for average size loads |
|
|
of medium weight where |
|
|
improved energy is desired |
|
|
|
|
|
NORMAL | Medium | 35 |
Jackets, pillows, corduroys, work |
|
|
clothes, sheets |
|
|
|
|
|
CASUAL | Low | 35 |
Permanent press, synthetics |
|
|
|
|
|
DELICATE | Extra Low | 30 |
Lingerie, blouses, washable |
|
|
woolens |
|
|
|
|
|
DAMP DRY | Low | 20 |
Clothes to come out suitable |
|
|
for ironing |
|
|
If loads do not seem as dry as you would like, select More Dry next time you dry a similar load.
Timed Cycles
Use Timed Cycles to select a specific amount of drying time and a drying temperature. When a Timed Cycle is selected, the Estimated Time Remaining display shows the actual time remaining in your cycle.
Press the TEMP button to change the drying temperature from the default setting.
Press the MORE TIME or LESS TIME button to increase or decrease the drying time. Tap MORE TIME or LESS TIME and the time will change by
Timed Cycle Settings
Timed Cycles | Default | Default Cycle |
Load Type | Temperature | Time* |
|
| (Minutes) |
|
|
|
TIMED DRY | High | 80 |
Heavyweight items, |
|
|
bulky items, bedspreads, |
|
|
work clothes |
|
|
|
|
|
SMALL LOAD | Medium | 27 |
|
| |
|
|
|
TOUCH UP | Medium | 20 |
Slightly damp items, and to |
|
|
remove wrinkles |
|
|
*Reset time to complete drying, if needed.
Air Dry
Use the Air Dry temperature setting with Timed Cycles for items that require drying without heat such as rubber, plastic, and
Type of Load | Est. |
| Time* |
| (Minutes) |
|
|
Foam rubber - pillows, padded bras, stuffed toys | 20 - 30 |
|
|
Plastic - shower curtains, tablecloths | 20 - 30 |
|
|
40 - 50 | |
|
|
Olefin, polypropylene, sheer nylon | 10 - 20 |
*Reset time to complete drying, if needed.
When using Air Dry
■Check that coverings are securely stitched.
■Shake and fluff pillows by hand periodically during the cycle.
■Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Automatic Cycles are not available when using the Air Dry setting.
6