Washer Connections
IIn This Section
Pa!PPaw
Pemmnent inetdktion ....................................... 5 Port&k
Permanent or portable installation is available for your washer. instructions and kit numbers are detailed in this section.
Permanent installation
This washer can be converted from portable to permanent. Instructions for permanent installa- tion come with the washer.
You will need two fill hoses, one drain hose and four leveling legs. These can be pur- chased from your Whirlpool Dealer
(Kit #3430190).
Portable one-faucet connection
Use the hose connector provided with the washer for a
To connect washer: |
| ||
1. | Lift the hoses off the storage rack on the |
| |
| back of the washer. |
| |
2. | Attach the hose | connector to the faucet |
|
| adapter by pulling down on the locking |
| |
| collar while lifting up on the connector until it |
| |
| snaps into place. |
| |
3. Slowly turn the water faucet on all the way. |
| ||
4. | Pull the electrical | power cord from the | connwtor |
| storage area in the back of the washer. Plug | ||
|
| ||
the power cord into a
Water temperature adjustment:
The Temperature Selector must be set to COLD/COLD to ensure proper fills. Adjust water temperature as follows:
l Adjust faucets for wash water temperature prior to the fill for wash.
lAdjust faucets for rinse water temperature prior to fill for rinse.
NOTE: Always use cold rinse water for permanent press fabrics.