Exhaust System Checklist

Installation Instructions

EXHAUSTING THE DRYER

WARNING – To reduce the risk of fire or personal injury:

•This dryer must be exhausted to the outdoors.

•Use only metal duct.

•Do not terminate exhaust in a chimney, any gas vent, under an enclosed floor (crawl space) or into an attic. The accumulated lint could create a fire hazard.

•Provide an access for inspection and cleaning of the exhaust system, especially at turns. Inspect and clean at least once a year.

•Never terminate the exhaust into a common duct with a kitchen exhaust. A combination of lint and grease could create a fire hazard.

•Do not obstruct incoming or exhausted air.

TOOLS AND MATERIALS YOU WILL NEED TO INSTALL EXHAUST DUCT

❒Phillips-head screwdriver

❒Duct tape or duct clamp

❒Rigid or UL-listed flexible metal 4” (10.2 cm) duct

❒Vent hood

HOOD OR WALL CAP

•Terminate in a manner to prevent back drafts or entry of birds or other wildlife.

•Termination should present minimal resistance to the exhaust airflow and should require little or no maintenance to prevent clogging.

•Never install a screen in or over the exhaust duct.

•Wall caps must be installed at least 12” above ground level or any other obstruction with the opening pointed down.

•If roof vents or louvered plenums are used, they must be equivalent to a 4” dampened wall cap in regard to resistance to airflow, prevention of back drafts and maintenance required to prevent clogging.

SEPARATION OF TURNS

•For best performance, separate all turns by at least 4 ft. of straight duct, including distance between last turn and dampened wall cap. For turns less than 4 ft. apart, see the Ducting Component Equivalency Chart.

SEALING OF JOINTS

•All joints should be tight to avoid leaks. The male end of each section of duct must point away from the dryer.

•Do not assemble the ductwork with fasteners that extend into the duct. They will serve as a collection point for lint.

•Duct joints should be made air- and moisture-tight by wrapping the overlapped joints with duct tape or aluminum tape.

•Horizontal runs should slope down towards outdoors 1/4” per foot.

INSULATION

•Ductwork that runs through an unheated area or is near air conditioning should be insulated to reduce condensation and lint buildup.

3828EL2001A 175D1807P416, 49-90152-1, DPTGT750 specifications

The GE Monogram DPTGT750 is a remarkable addition to the field of premium kitchen appliances, known for its sophisticated design and advanced functionalities. This range, specifically recognized for its high-performance features, seamlessly blends elegance with efficiency. A standout characteristic of the DPTGT750 model is its powerful gas burners, which are engineered to deliver professional-grade cooking performance. The unit boasts up to 20,000 BTUs, allowing for rapid heating and precise temperature control to accommodate various culinary techniques, from simmering to high-heat searing.

One of the notable features of the GE Monogram DPTGT750 is its dual-fuel capability. This means it can use both gas and electricity, providing the user with the benefits of gas cooking, such as instant heat and precise flame control, while also utilizing electric ovens that ensure even baking and superior results. The oven includes advanced convection technology, distributing heat uniformly throughout the cooking space, ensuring that every dish is cooked to perfection.

The model also emphasizes user convenience through its integrated touchscreen controls, which simplify the cooking process. This intuitive interface allows for easy navigation between cooking modes, temperature adjustments, and timers. Additionally, the GE Monogram DPTGT750 includes a self-cleaning feature, making maintenance a breeze and ensuring that the appliance remains in excellent condition over time.

Another standout aspect of the DPTGT750 is its sophisticated design, featuring a stainless steel finish that enhances the aesthetic appeal of any modern kitchen. The unit is also equipped with enhanced safety features, such as automatic shut-off valves and flame failure detection, giving users peace of mind during operation.

Alongside the DPTGT750, the model 49-90152-1 complements this range with specific accessories that enhance its functionality. The 3828EL2001A and 175D1807P416 components are vital for maintenance and ensure the appliance operates with optimal efficiency. These parts are integral to the performance and longevity of the cooking range, ensuring that users get the best possible experience from their investment.

In conclusion, the GE Monogram DPTGT750 is engineered for culinary enthusiasts who seek a combination of style, technology, and performance. With features that prioritize user convenience and superior cooking results, this appliance stands out as a leader in contemporary kitchen design. Whether baking, broiling, or sautéing, this range promises professional results to elevate any culinary experience.