Frigidaire 137102600 Cycle Selection Con’t, Drying Temperature, Cycle Settings, Dryer Features

Cycle Selection (Con’t)		To increase drying time for similar loads in the future, select
Drying Temperature		More Dry. For loads requiring less drying time, select Less Dry.
		Select Damp Dry for items you wish to partially dry before hang-
For best results, follow the fabric care label instructions on items		ing or ironing.
to be dried. To change the drying temperature, press TEMP to			Note: To prevent over-drying, not every dryness level is
scroll to the desired heat. To protect your wardrobe, not all
			available with every cycle.
temperatures are available with every cycle.
		Options
High heat is recommended for sturdy fabrics.
		To select an option, press OPTIONS until the indicator for the
Medium High heat is recommended for most cotton fabrics.
		desired option flashes, then press Select. If an option is not
Medium heat is recommended for wrinkle free, permanent press		available for a cycle, the indicator will not light. Follow the same
and lightweight fabrics.		steps to delete an option.
Low heat is recommended for delicate fabrics.		The Cycle Signal will sound at the end of the cycle and periodi-
No Heat should only be used with a Timed Dry	setting to dry	cally during Press Saver.
items containing feathers, down, foam rubber, plastics or rub-		Select Shrink Guard to lower the initial drying temperature to
ber-like materials; to freshen clothing, pillows or blankets; or to		protect fabrics from overdrying.
dust draperies.		Select Press Saver if the dried load might not be removed
Note: Using No Heat in any Auto Dry cycle will	result in	promptly at the end of the cycle. The dry load will continue to
long drying times and /or wet loads at the end of the cycle.		tumbling without heat for 30 minutes to help reduce wrinkling.
		When the Cycle Signal is selected, a beep will be heard
Cycle Settings		periodically. The load may be removed any time during Press
Appropriate drying temperature, dryness level and options will		Saver.
automatically be indicated for each cycle. The TEMP, DRYNESS		Dryer Features
and OPTIONS settings can be changed before the cycle is
started. Those adjustments will automatically be remembered			(Control Lock)
each time that cycle is selected. If a temperature, dryness level		To avoid having someone accidentally start or stop the washer,
or option is not recommended for a cycle, the indicator will not		press OPTIONS and Select at the same time and hold for about
light.		10 seconds until the (Control Lock) lights up. “LOC” will be
If changes are attempted after the cycle starts, the status lights		displayed alternately with the estimated cycle time. Turning
will blink, the signal will beep and “Err” will be displayed. To		the Cycle Selector knob or pressing any button will produce
change a setting after the cycle starts, press Pause/Cancel once,		flashing indicator lights and/or beeping. To unlock the controls,
adjust the setting and press START to resume the cycle. See		press and hold OPTIONS and Select for about 10 seconds.
the “Dryer Settings Chart” for more details.		Status Lights
Dryness Level		The following indicators may be lighted during the cycle:
To change the dryness level, press DRYNESS until the desired		•	Drying
selection is made. Select Normal for most loads.		•	Cool Down
Occasionally a load may seem too damp or over-dried at the end		•	Press Saver
of the cycle.		•	Clean Lint Filter
	DRYER• SETTINGS CHART
			(Control Lock)

These temperatures,AVAILABLE CYCLEdrynessSETTINGSlevels- Th se temperatures,and optionsdrynessarel velsavailablend optionswithare availablethe followingwith the followingcycles:cycles:

*Factory setting

Available settings

**Timed Dry Cycle Only

***Estimated cycle duration is based on normal dryness level and factory settings.

	Towels	Normal	Perm Press	Delicate	Quick	Bulky		Timed Dry
Estimated	60 minutes	50 minutes	40 minutes	20 minutes	30 minutes	45 minutes		15 to 90
drying time ***								minutes
Temperatures
High	*
Medium-High		*						*
Medium			*		*	*
Low				*
No Heat	**	**	**	**
Dryness Level
More Dry
Normal Dry	*	*	*
Less Dry				*
Damp Dry
Options
Shrink Guard				*
Press Saver			*	*
Cycle Signal	*	*	*	*	*	*		*
* Factory	Available	** Not		*** Estimated	cycle duration is based on normal				(0806)
setting	settings	recommended		dryness level and factory settings.			137102600