Frigidaire FAQE7072LR, FASE7073LA Cycle Options, Energy Saver, Add Steam on select models

OPERATING INSTRUCTIONS

Cycle Options

To add options, press the corresponding options buttons to illuminate the selections desired. To delete options, press the options buttons again and the indicator lights will turn off. Some Options require a “Press & Hold” effort to activate or deactivate the secondary function.

Not all options are available on every model. To protect your fabrics, not all options are available with every cycle. If an option is not appropriate for the cycle, the indicator will not light. Occasionally, a setting and option in the same cycle will conflict with each other, like Sanitize temp and Damp dry level. When this happens, the option selected first will cause the conflicting option to not be selectable.

NOTE

To change the Options after the cycle starts, press Pause, adjust the setting and press Start to resume the cycle.

Allergy (on select models)

Use this option to reduce allergens as you dry your load. Not recommended for items prone to heat

damage.

Energy Saver

The Energy Saver option reduces the drying temperature a few degrees to save energy. In conjunction with automatic moisture sensors, cycle times will increase slightly, but overall energy usage will decrease. On some models, you may also notice after the cycle begins most lights and indicators will turn off. To turn those lights temporarily back on press Energy Saver during the cycle.

Add Steam (on select models)

The Add Steam option injects steam into the clothing prior to cool down to reduce wrinkling.

Drum Light ( Press & Hold on some models) The drum light will come on whenever the door is opened to illuminate the drum during loading and unloading. Closing the door turns off the light. The drum light will automatically turn off if the door is left open more than 3 minutes.

On models with Press & Hold features, you can activate the drum light during a cycle by pressing and holding the button under Options with the symbol. The light will stay on during the cycle for 3 minutes. To turn it off, press and hold the button again.

ultra capacity

		wrinkle
sanitize	max	release
high	high	line
		dry
normal	normal	delay
low	low	start
air dry	damp	chime
		shrink
		guard
		control
		lock

ready steam system

			wrinkle
sanitize	max	90	release
high	high	75	line
			dry
normal	normal	60	delay
low	low	30	start
			add
air dry	damp	touch
			steam
		up	anti

static

control lock

ready steam system

			wrinkle
sanitize	max	90	release
high	high	75	line chime
			dry
normal	normal	60	delay
low	low	30	start
			shrink
air dry	damp	touch
			guard
		up	anti

static

control lock

12