GE DBLR453ET, DBLR453GT operating instructions Try a fabric softener

Problem		Possible Causes	What to Do
			“Try a fabric softener.
			● Adjust controls for less drying.
		No fabric softener was used	● TV a fabric softener.
		Synthetics, permanent press	“Try a fabric softener.
		and blends can cause stitic
		hproper sorting	● Separate heavy items from lightweight items
			(generally, a well-sorted washer load is a
			well-sorted dryer load).
		Large loads of heavy items	● Large, heavy loads contain more moisture
		(We beach toweb)	and take longer to dry. Separate large, heavy
			items into smaller loads to speed drying time.
		Controk improperly set	● Match control settings to the load you
			are drying.
		Lint fiiter is f~	● Clean lint filter before every load.
		hproper or obstructed	● Check installation instructions for proper
		ducting	ducting/venting.
			● Make sure ducting is clean, free of kinks
			and unobstructed.
			. Check to see if outside wall damper
			operates easily.
			. See the Venting the Dryer section.
	Blown fuses or tripped		● Replace fuses or reset circuit breakers. Since
	circuit bre&ers		most dryers use 2 fuses/breakers, make sure
			both are operating.
	@erloading/		● Do not put more than one washer load in
	combining loads		the dryer at a time.
	Underloading		● If you are drying only one or two items,
			add a few items to ensure proper tumbling.

16