Drying Procedures
Followfabriccarelabelinstructions.
Place small items in a mesh bag.
Fill dryer drum 1/3 to 1/2 full.
•Followtheguidelinesbelowforpreparingtheloadfordrying.
•ReadtheOperatingInstructionscardforoperatingyourspecificmodel.
•Always read and follow fabric care labels and laundry product labels.
Toreducetheriskoffire,electricalshock,orinjurytopersons,read ImportantSafetyInstructions, pages
1.Prepare items for drying.
•Dryitemsofsimilarfabric,weightandconstructioninthesameload.
•
•Besurebuckles,buttonsandtrimareheatproofandwon'tdamagethedrum
•Ifpossible,turnpocketsinsideoutforevendrying.
•Checkforstainswhichmaynothavebeenremovedinwashing.Dryerheat maypermanentlysetsomestains.Repeatstainremovalprocessbefore drying.
•Placesmallitemsinameshbagtopreventtanglingandforeasyremoval.
2.Check that lint screen is clean and in place.
3.Load the dryer.
•Theaverageloadwillfillthedrum1/3to1/2full.Itemsneedroomtotumble freelyforevendryingandlesswrinkling.Donotoverloaddryer.
•Whendryinglargeitems,dryonly2or3atatime.Fillouttheloadwithsmall andmediumsizeditems.
•
•Donotoverdryitems.Overdryingcancausewrinkling,shrinkage,harshness,
•Ifdesired,addadryerfabricsoftenersheet.
4.Close the dryer door and set dryer controls (some models).
SeeOperatingInstructions card for your specific model controls.
5.Turn cycle selector clockwise to the desired setting.
6.Start the dryer.
•PushStartButtonfor2secondsorturntheSTARTknobclockwisetoON,hold
•Toaddorremoveitemswhenthedryerisrunning,openthedoor.Thedryer will always stop when the door is opened. Allow the drum to come to a completestopbeforereachinginside.
•Torestartdryer,closethedoorthenpushtheStartButtonfor2secondsor
•ThedryerwillnotstartifthecycleselectorisintheOFFposition.
7.When the cycle ends, remove items immediately and hang orfold.If load is removed before the cycle ends, turn cycle selector to OFF.
4