About the control settings.
A
End of Cycle Signal
This signal will sound just before the end of the cycle to remind you to remove the clothes.
If you select the EXTEnDED TuMblE option, the signal will sound at the end of the drying time and will sound several times during the EXTEnDED TuMblE cycle. This will remind you that it is time to remove the clothes.
nOTE:
•Remove garments promptly at the sound of signal. Place clothes on hangers so wrinkles won’t set in.
•Use the EnD Of CyClE SIGnAl especially when drying fabrics like polyester knits and permanent press. These fabrics should be removed so wrinkles won’t set in.
Extended Tumble
Use this option to minimize the wrinkles in clothes. It provides approximately 1 hour of
If you are using CyClE SIGnAl and you select the EXTEnDED TuMblE option, a signal will sound at the end of the drying time and several times during the EXTEnDED TuMblE cycle. This will remind you that it is time to remove the clothes.
bTemperature
HIGH | For regular to heavy cottons. |
| nOTE: STEAM DEWRInklE and STEAM REfRESh require the High temperature setting. |
|
|
MEDIUM | For synthetics, blends, delicates and items labeled permanent press. |
|
|
LOW | For delicates, synthetics and items labeled tumble dry low. |
|
|
EXTRA LOW | For delicates, synthetics and items labeled tumble dry low. |
|
|
NO HEAT | For fluffing items without heat. For use only with the TIMED DRy cycles. |
C
MORE DRY | Use for |
|
|
DRY | Use for a normal dryness level suitable for most loads. This is the preferred cycle for energy savings. |
|
|
LESS DRY | Use for lighter fabrics. |
|
|
DAMP | For leaving items partially damp. |
DEstimated Time Remaining Display
•Displays the approximate time remaining until the end of the cycle.
•If the estimated time remaining is 60 minutes or more, “1H” will flash in the display, followed by the additional remaining minutes. When the time remaining is less than 60 minutes, the timer will count down.
Message Displayed | Description | |||
|
|
|
|
|
|
|
|
| (On some models) The message “PAUSE” will scroll |
|
|
|
| |
|
|
|
| across the display when the dryer’s cycle is paused. |
|
|
|
| The cycle may be restarted by pressing the START |
|
|
|
| button. |
|
|
|
| |
|
|
|
|
|
|
|
|
| The message “door” will be displayed when the door |
|
|
|
| |
|
|
|
| is opened during the dryer’s cycle. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| The message “HEAt” will be displayed when the start |
|
|
|
| |
|
|
|
| button is pressed for a steam refresh or |
|
|
|
| cycle. Turn the temperature knob to “High” and press |
|
|
|
| the start button. |
|
|
|
| |
|
|
|
|
|
6