OPERATING YOUR DRYER
WARNING – To reduce the risk of fire, electric shock, or injury to persons
when using your appliance read the IMPORTANT SAFETY INSTRUCTIONS
before operating this appliance.
5 | 1 | 3 | 4 | 2 |
5 | 1 | 3 | 4 | 2 |
5 | 1 | 3 | 4 | 2 |
Features and appearances may vary.
1Drying Selections. Select the proper heat on the Fabric Care selector for your load.
NOTE: Drying times will vary according to the type of heat used (Electric, Natural gas or LP gas), size of load, types of fabrics, wetness of clothes, and condition of exhaust ducts.
| Should be used with cycles indicated | |||
|
|
|
|
|
Drying | Automatic | Automatic |
|
|
Selections | Cottons | Perm. Press | Timed | UltraCare |
|
| (or Easy Care) |
|
|
|
|
|
|
|
Cottons |
|
|
|
|
Regular Heat |
|
|
|
|
|
|
|
|
|
Perm. Press |
|
|
|
|
(or Easy Care) |
|
|
|
|
Medium Heat |
|
|
|
|
Knits/Delicates |
|
|
|
|
Low Heat |
|
|
|
|
Fluff |
|
|
|
|
No Heat* |
|
|
|
|
UltraCare |
|
|
|
|
Gentle Heat |
|
|
|
|
2Cycle Selector. Turn the Cycle Selector to the desired cycle setting. The selector may be turned in either direction. Select “Optimum” for preferred energy setting.
3Extra Care Cycle. (Available on some models.)
The Extra Care cycle operates only with the Automatic cycles. Turn the Extra Care knob to SET, and turn the Cycle Selector Dial to the desired amount of heated drying time.
To minimize the wrinkle setting in clothes, the Extra Care cycle provides from 15 to 20 minutes of
Use the End Cycle Signal to remind you to remove the dried laundry.
4End Cycle Signal. (Available on some models.)
Set End Cycle Signal, if desired. This signal operates with any cycle on some models. The control can be set ON and OFF or anywhere between OFF and LOUD, depending on the model and desired sound level. The signal will start to sound just before the end of the cycle to remind you to remove the clothes. To stop the signal while sounding, turn the signal control to OFF.
10