ABOUT CYCLE OPTIONS
SIGNAL
Alerts you that the cycle is complete. The beeper will continue to sound every two minutes for the next 6 minutes, until the clothes are removed. The clothes should be removed when the beeper goes off so wrinkles won’t set in.
On some models, press SIGNAL to turn the beeper on or off.
On some models, press SIGNAL to select low or high volume, or to turn the beeper off.
EXTEND TUMBLE
Minimizes wrinkles by adding approximately 20 minutes of
ANTI-BACTERIAL
This option can only be used with the COTTONS or MIXED LOADS cycles.
This option reduces certain types of bacteria by 99.9%, including: 
and 
The
NOTE: Do not use this cycle on delicate fabrics.
*The
| NSF Protocol P9 |
|
| Sanitization Performance of |
|
® | Residential Clothes Dryers |
|
NSF |
| |
|
|
|
DELAY 1-8 HOURS
Use to delay the start of your dryer for 1 to 8 hours. First choose your dry cycle and any options. Then press this pad for the number of hours you want to delay the cycle.
Press the START pad to start the countdown.
The countdown time will be shown in the Est. Time Remaining display.
NOTE: If the door is opened while the dryer is in DELAY, the dryer will beep once a minute to remind you to restart the countdown. The countdown time will not restart unless the door is closed and START has been pressed again.
DAMP SIGNAL
This option causes the dryer to beep when clothes have reached a damp dryness. Remove items that you wish to hang dry. The DAMP SIGNAL will only beep when the dryer SIGNAL is turned on.
WARM UP
This option provides 10 minutes of warming time to warm up clothes. Perfect for use on a cold day, or to warm towels or robes.
15
Operating Instructions