GE 175D1807P596 operating instructions About reversing the door Ge.com

Page 9

About reversing the door.

ge.com

Reversing the Door

Toolsneeded:

[] 5tondord #2

[] Tope-tipped

Phillipsscrewdriver putty knife

[_ Openthe door and remove the filler plugs opposite the hinges. With the door completel9 open, remove the bottom screw from each hinge on the dryer face, Insert these screws

about half wau into the TOP holes,for each hinge, on the opposite side (where you removed the filler plugs).Applu firm pressureto get the screw started in new holes.

[_] Loosentop screw from each hinge on the dryer face half wag, With one hand holding the top of the door and the other hand holding the bottom, remove the door from the druer bg lifting it UP and OUT.

[_] Rotate the door 180°. Insert it on the opposite side of the opening bg moving the door IN and DOWN until the top hinge and the bottom hinge are resting on the top screws

inserted in step 1.

I_] Removethe remaining screws from the side of the opening from which the door was removed. With these screws,secure each hinge at the bottom. Tighten the two top screws of each hinge. Reinsertthe plastic plugs on the side from which the door was removed,

9.

9

Image 9
Contents Ge.com Troubleshooting TipsProperinstallation Your Laundry Area Readand Followthissafetyinformationcarefully Opmrmsry About the drger control panel Ge.comIgl Important Clean the lint filter each time gou use the drger About the control settingsCgcle Signal Option onsomemodels About the dryer featuresAutomatic Cycle Signal ton some models Drum Lamp on somemodelsAbout reversing the door Ge.com Sorting and Loading Hints Care and Cleaning of the DryerVenting the Dryer Before you call for service Loads to speed drying time Page GE Will Replace For The Period OhConsumer Support Contact UsGe.com