Kenmore 796.8127# manual Read ALL Instructions Before USE

Page 3
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

Your safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER or WARNING. These words mean:

DANGER:

WARNING: Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION:

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

WARNING: For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

Do not install a clothes dryer with flexible plastic venting materials. If a flexible metal (foil type) duct is installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with clothes dryers.

Flexible venting materials are known to collapse, be easily crushed, and trap lint. These conditions will obstruct clothes dryer airflow and increase the risk of fire.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this appliance or any other appliances.

Installation and service must be performed by a qualified installer, service agency, or the gas supplier.

Install the clothes dryer according to the manufacturer’s instructions and local codes.

Save these instructions.

WHAT TO DO IF YOU SMELL GAS:

1.Do not try to light a match or cigarette, or turn on any gas or electrical appliance.

2.Do not touch any electrical switches. Do not use any phones in your building.

3.Clear the room, building, or area of all occupants.

4.Immediately call your gas supplier from a neighbor’s phone. Carefully follow the gas supplier’s instructions.

5.If you cannot reach your gas supplier, call the fire department.

SAVE THESE INSTRUCTIONS

3

Image 3
Contents Dryer Troubleshooting Guide Features and BenefitsInstallation Instructions HOW to USERead ALL Instructions Before USE Basic Safety Precautions Weather Follow basic precautions, including the followingSafety Instructions for Connecting Electricity KEY Parts and Components Choose the Proper Location KEY Dimensions and SpecificationsAdditional instructions for closet installations Location RequirementsOptional Accessories Installation with Optional Pedestal Base or Stacking KITElectrical Requirements for GAS Models only Connecting GAS DryersProceed to Venting the Dryer Connecting the Gas SupplyHigh-Altitude Installations Gas shutoff valve must be installed within 6 ftConnecting Electric Dryers Electrical Requirements As well as all new construction after January 1 Connecting Electric DryersFour-Wire Power Cord Three-Wire Power CordUsing the Duct Length Chart below Routing and Connecting Ductwork Connecting the Dryer VentVenting the Dryer Leveling the Dryer Final Installation Check Testing Dryer HeatingChecking Venting Control Panel Features Operating the Dryer Auto Dry Cycles Cycle GuideTimed Dry Cycles Loading the Dryer Sorting LoadsFabric Care Labels Group Similar ItemsDuct Blockage Sensing System Time Display Check Vent IndicatorCycle Status Indicators Time and Status DisplayTimed DRY Cycle Modifier ButtonsTemp DRY LevelTo save a MY Cycle Cycle Options and Special FeaturesMy Cycle allows you to store a Then recall them at the touch of a buttonCleaning Around and Under the Dryer Regular CleaningCleaning the Exterior Cleaning the InteriorCheck Vent Operation Check Vent IndicatorMaintaining the Exhaust System Maintaining the Exhaust SystemKenmore Connect System Using the Kenmore Connect SystemProblem Possible Cause Solutions Before Calling for ServiceClothes are shrinking Before Calling for Service Problem Possible Cause SolutionsDry Clothes are wrinkledCode tE1 or tE2 Lint on clothes Display shows errorDisclaimer of implied warranties limitation of remedies Kenmore Limited Warranty