CDA CI920 manual Electrical information

Page 10

Electrical information

Warning! This appliance must be earthed.

The mains lead of this appliance has been fitted with a BS 1363A 13 amp fused plug. To change a fuse in this type of plug, follow the steps below:

1.Remove the fuse cover and fuse.

2.Fit a replacement 13A fuse, ASTA approved to BS 1362 type, into the fuse cover.

3.Replace fuse cover.

Important: Do not use the appliance without the fuse cover in position.

How to connect an alternative plug

If the fitted plug is not suitable for your socket outlet, then it should be cut off and disposed of safely to avoid possible shock hazard. A suitable alternative plug of at least 13 Amp rating to BS 1363 should be used.

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:-

The wire which is coloured GREEN and YELLOW must be connected to the terminal which is marked with letter (E) or

by the Earth symbol or coloured GREEN and YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter (N), or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter (L) or coloured RED.

If in doubt regarding the electrical connection of this appliance, consult a qualified electrician. Do not shorten the supply cable, the appliance may require removing for servicing.

N.B. Ensure that the plug socket is situated in an easily accessible place.

8

Image 10
Contents CI920 Freestanding Tumble Dryer Contents Appliance information User Information Heat Settings Start Use And ControlsCare labels you may find on your fabrics Care And Maintenance Cleaning The Filter TroubleshootingInstallation/Venting Fitting the décor doorReversing The Door Electrical information Technical information 4213 094