Troubleshooting
One day your dryer seems not to be working. Before you call your Service Centre (see Service), go through the
GB | following troubleshooting suggestions: |
| |
|
| ||
| Problem: | Possible causes / Solution: | |
| The dryer won’t start. | ● | The plug is not plugged into the socket, or not making contact. |
|
| ● | There has been a power failure. |
|
| ● | The fuse has blown. Try to plug another appliance into the socket. |
|
| ● | You are using an extension cord? Try to plug the dryer’s power cord |
|
|
| directly into the socket. |
|
| ● | The TIMER knob has not been set properly (see Start and Programmes). |
|
| ● | The START button has not been pressed (see Start and Programmes). |
|
| ● | The START button was pressed with the door open. Make sure the door is |
|
|
| closed before pressing the START button (see Start and Programmes). |
! If the START button is pressed with the door open the dryer will not start. Close the door, wait for a few seconds and then press the START button again (see Start and Programmes).
It is taking a long time to dry.
●The filter has not been cleaned (see Maintenance).
●The temperature setting is not ideal for the type of fabric you are drying (see Start and Programmes).
●The correct programme has not been selected for the load (see Start and Programmes).
●The flexible vent tube is obstructed (see Installation).
●The air intake vent is obstructed (see Installation).
●The permanent ventilation flap on the storm cover is obstructed (see Installation).
●The items were too wet (see Laundry).
●The dryer was overloaded (see Laundry).
12