The Control Panel
PROGRAMMES
Condenser Dryer
|
|
|
|
|
|
| FULL TANK | MAINS |
|
|
|
|
|
|
|
| T D C 1 0 0 0 W |
|
|
| |
|
|
|
|
|
|
|
|
| DOOR OPEN | R E V E R S E |
| COTTONS - LINENS |
| SYNTHETICS - MIXED FABRICS |
|
| |||||
|
|
|
|
| ||||||
SPIN SPEED | STORE DRY | IRON DRY | SPIN SPEED |
| STORE DRY |
|
| action | ||
11 lbs | 650 rpm | 100 mins | 90 mins | 5.5 lbs | 650 | rpm | 55 mins |
|
| |
|
|
| ||||||||
11 lbs | 90 mins | 80 mins | 3.3 lbs | 650 | rpm | 35 mins |
|
|
| |
5.5 lbs | 650 rpm | 65 mins | 55 mins | 2.2 lbs | 650 | rpm | 30 mins |
|
|
|
5.5 lbs | 60 mins | 45 mins | 1.5 lbs | 650 | rpm | 25 mins |
|
| IMPORTANT: PLEASE READ INSTRUCTION BOOK BEFORE USE | |
|
|
| 1 |
|
|
| 2 | 3 | 4 | 5 |
1 Programme Chart
This will help you to select the correct time for drying.
2 Full Tank Indicator Light
This light illuminates when the water reservoir is full or improperly fitted.
The programme will be interrupted.
Attention: The time selector dial continues to turn towards the “STOP” position, but the drying cycle is stopped, that means that the laundry is not dried.
After having emptied the tank, you have to select the drying programme again for the time required to complete drying.
After this operation, the dryer can stay still for some minutes before starting the programme and during this period the FULL TANK light remains alight.
3
This light indicates operating status. It switches off at the end of the programme.
4 Door Open Button
Depress this button to open the door.
Should the door be opened while appliance is working, the tumble dryer will stop functioning but the time selector dial continues to turn.
5 Time Selector Dial-On/Off Switch 
Turn the dial clockwise (to the right) to select the time for drying (see Chart page 6). At the same time the machine is switched on and the programme starts.
This dryer has two drying cycles of up to 120 and 80 minutes, giving a high or low heat temperature according to the type of fabric.
When selecting the drying time you should remember that it includes a 12 minute cooling phase (position 
on the dial).
This phase should not be shortened, stopped or avoided, as this could cause skin burns or damages to the laundry.
5