Stopping the appliance, Cooling cycle | Fagor America SFA-8CELX

EN		5 / OPERATING INSTRUCTIONS AND PROGRAMMING

EN 5 / OPERATING INSTRUCTIONS AND PROGRAMMING

• Stopping the appliance :

At the end of the program, the “Filter”

and “Tank Full” lights flash alternately to remind you that you must clean the filter and empty the water collection tank after

End of program

Pause	Stop	+
		+
		Delay Timer
		-
Anti-creasing	Beeper	Extra Drying
Anti-creasing	Beeper	Time

• Cooling cycle :
All programs finish with a cooling cycle that	Cooling cycle
lasts for a few minutes to allow the washing to	Pause	Stop
lasts for a few minutes to allow the washing to		+
cool gradually.		-

every drying cycle :

Press the “On/Off”button H and empty your drier.

Clean the filter and empty the water collec- tion tank (see the “REGULAR MAINTE- NANCE” section).

• “Anti-creasing” option :

The “Anti-creasing” option fluffs the textiles every 10 minutes for up to 24 hours, until the door is opened or the machine is turned off. It begins as soon as the drying finishes and prevents the clothes from settling in the machine. To select this function, press the “Anti-creasing” B . An indicator lights up to show that this option has been activated.

• “Beeper” option :

The “Filter” and “Tank Full” lights flash

“Anti-creasing” option

Pause	Stop	+
		+
		Delay Timer
		-
Anti-creasing	Beeper	Extra Drying
Anti-creasing	Beeper	Time

Important :

Do not stop your dryer before this cycle has finished.

• During the cycle :

Your tank is full during the drying cycle. The appliance stops during the program.

The “Tank Full” and “Pause” turns on, the time remaining flashes.

Proceed to empty your water collection tank (see the “REGULAR MAINTENANCE” sec- tion).

Press “Start/Pause” G to restart your pro- gram.

Program stop

Pause	Stop	+
		+
		Delay Timer
		-
Anti-creasing	Beeper	Extra Drying
Anti-creasing	Beeper	Time

The ”Tank Full” light illuminates.

Press the “Buzzer” button C . At the end of drying, three beeps will sound every 10 minu- tes for one hour until the door is opened or the appliance is stopped. The indicator light corresponding to this option lights up at the bottom of the screen, indicating that the buz- zer is activated.

“Beeper” option

Pause	Stop	+
		+
		Delay Timer
		-
Anti-creasing	Beeper	Extra Drying
Anti-creasing	Beeper	Time

Important :

A power failure cancels the current program. In this case, you have to reset all the pro- gramming operations.

• “Additional Drying” option :

This function enables you to add drying time	Additional time	Pause	Stop	+
at the end of a program in units of 10 minutes				+
by successively pressing the “Extra Drying				Delay Timer
by successively pressing the “Extra Drying				-
Time” button D .		Anti-creasing	Beeper	Extra Drying
Time” button D .		Anti-creasing	Beeper	Time
Press the “Start/Pause” button. The additio-
nal drying time is added at the end of the
selected program.

Remarks :

The “Anti-creasing” and "Beeper" options remains selected from one program to the next. You can simply press the button to deactivate these options, even during a program.

Advice :

As a safety measure, you are advised to unplug the power cable when you are not using the appliance.