INSTALLATION - with harness system
1Place
2Lift seat pad flap, thread vehicle seat belt through openings and buckle belt (fig. a).
3Press down firmly in center of car seat to compress vehicle seat cushion while tightening vehicle seat belt.
HINT: Use your knee to press down in center of car seat (fig. b).
4Pull front to back and left to right to check for secure installation (fig. c). Vehicle lap belt MUST stay tight.
If not secure, see “Vehicle Seat Belts” section.
5Attach tether hook (A) to anchor hardware (B) and tighten strap to remove any slack (fig. d).
If tether anchor hardware (B) is not available, see “Installation of Anchor Hardware“ section.
Opening | Pull to |
| tighten |
(A)
(B)
6 | (fig. a) | (fig. b) | (fig. c) | (fig. d) |