Electrolux 57700 operating instructions Off

Something not working?

Symptom	Possible cause	Solution
	The water hardness in	Reprogram the standard
The drying result is unsatis-		setting, eg. H0 instead of
	your area does not corre-
factory; the washing is still		H1, for dryer washing (see
damp.	spond to the standard	chapter “Programming
	setting of the appliance.
		Possibilities“.
	Is the tumble dryer	Plug in the tumble dryer
	plugged in
The drum illumination does	The program selector is in	Turn the program selector
not work
	the OFF position	dial to LIGHT
	The bulb needs replacing	Replace bulb
The drying process takes	The condenser unit is	Clean the condenser unit
	covered with fluff
unusually long
	Fluff filter is clogged	Clean the fluff filter
	Electric mains plug not	Connect the mains plug
	connected
The fill-in door cannot be		Set a program. The fill-in
		door can be opened at
opened with the DOOR button	Program selector set to
		any time by pressing
	OFF	firmly against the door
		(pressing location	)
	Fluff filter has not been	Replace the fluff filter
The door cannot be closed	inserted correctly and/or	and ensure the filter lid is
	the filter lid not closed	closed
Display EMPTY WATER is lit	Condensate container full	Empty the condensate
		container
		With the container pulled
EMPTY WATER indicator illu-	Foreign bodies, e. g. ani-	out, switch on the
	mal hairs, can block the	appliance momentarily.
minated, even though the
	inlet nozzle as well as the	The blockage can be
container has already been
	valve on the end of the	removed from the contai-
emptied
	EMPTY WATER container	ner shaft or the hair clea-
		ned out of the valve
The dryer terminates the		Select time program or
drying process automatically:	Too dry or too little
		higher drying stage (e.g.
END is displayed shortly after	laundry filled-in for the
		EXTRA DRY instead of
program start; no display of	selected program
		CUPBOARD DRY)
the extent of drying

28