10Operating Instructions
Cycle Selection
Turn the cycle selector in either direction to the cycle desired. The indicator for that cycle will be illuminated. Press on the cycle selector knob to extend it or return it flush to the console.
For best results
Follow the fabric care label instructions on items to be dried.
To change the cycle once it has begun, press the cancel button before selecting a new cycle. Just turning the cycle selector knob to another selec- tion will not change the cycle.
AUTO DRY CYCLES
Auto Dry cycles take the guesswork out of select- ing the correct drying time for each load. Moisture sensing bars at the back of the dryer drum sense the moisture level of the load as it tumbles through the heated air. With Auto Dry cycles, the load will automatically be dried at the selected temperature to the desired dryness level.
Auto Dry cycles save time and energy and protect fabrics. When the load has reached the selected dryness level, it will continue to tumble, unheated, during a cool down period. This helps reduce wrinkling and makes items easier to handle during unloading.
Drying time varies depending on size and damp- ness of load and fabric type. If the load is too small or almost dry, the moisture sensing bars may not detect enough moisture to continue the cycle and the cycle may end after a few minutes. If this oc- curs, then select the time dry cycle to dry such loads.
Room temperature and humidity, type of installa- tion and electrical voltage or gas pressure can also affect drying time.