Beko DRCS 68 S Important Safety Instructions, AThis product has been designed for home use only

Page 5

2Important Safety Instructions

AWARNING:To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions including the fol- lowing:

Read all instructions before using the appliance. Otherwise, there may be the risk of personal injury or material damage. Moreover, any warranty and reliability commitment will become void.

AThis product has been designed for home use only.

Your machine can be operated at temperatures between +5°C and +35°C.

The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the tumble dryer.

Do not install or store this appliance where it will be exposed to the weather.

Do not tamper with controls.

Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out.

Unplug the machine when it is not in use.

Never wash down the appliance with water! There is the risk of electric shock!

Never touch the plug with wet hands.

Never pull from the cable to unplug the machine.

Do not operate the machine if the power cord or plug is damaged.

Never attempt to repair the machine yourself.

For malfunctions that cannot be solved by information in the operating manual: Turn off and unplug the appliance and call an authorized service agent.

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug.

The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

BWARNING: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service represantative or personnel if you are in doubt as to whether the appliance is properly grounded.

Power cord plug must be within easy reach after installation.

To reduce the risk of fire or electrical shock, do not use extension cords, multi-plugs or an adapter to connect the dryer to electrical mains.

Do not modify the plug provided with the appliance: if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

The appliance must not be operated unless it is repaired! There is the risk of electric shock!

Ventilation openings in the base must not be obstructed by a carpet, etc.

Exhaust air must not be discharged into a flue, which is used for exhausting fumes from appliances burning gas or other fuels.

Adequate ventilation has to be provided to avoid the back flow of gases into the room from appliances burning other fuels, including open fires.

5 - EN

Image 5
Contents Drcs 68 W Drcs 68 S Read the instructions Useful information Explanation of symbols Important safety information Please read this manual first Your Dryer Overview Your DryerAThis product has been designed for home use only Important Safety InstructionsPage Appropriate installation location InstallationUnder Counter Installation Adjusting the feetPage Disposing of the old machine Destroying the packaging materialElectrical Connection Built-under installationElectrical requirements Fitting a different plugWasher/dryer combination Garments suitable for drying in the machine Initial preparations for dryingGarments unsuitable for drying in the machine Preparing clothes to be driedLoading door Control panel Selecting a Programme and OperatingYour MachineProgramme selection Turning the machine onProgramme selection and consumption table Progress of programme Auxiliary functionStarting the Programme Adding/removing laundry in standby mode Ending the programme through cancelingChild-proof lock End of programmeModel code Type label is located behind the loading door Technical SpecificationsQuick instructions for daily use Cancelling a programmePreparation and starting Adding laundryCover filter Maintenance and cleaningSensor models equipped with a sensor Water tank Products equipped with a condenserFor the condenser products equipped with a condenser Solution suggestions for problems Door Reversal What is covered? GuaranteeWhat is not covered? Important notesService once the manufacturers Guarantee has expired ServiceUK Mainland & Northern Ireland Republic of Ireland03122008/2960310009