¾Adjusting the leveling legs
To install and adjust the leveling legs see the illustration to the right.
If the floor is uneven adjust the legs (do not insert pieces of wood, or any other objects under the legs)
•Adjust the height level of the legs accordingly.
Place the dryer on a sturdy flat surface.
If the dryer is placed on an uneven or weak surface, noise or vibration will occur. (Allowable is 1º)
¾Electrical Connection
Warning
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center.
This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a
Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
Use of extension cord is not recommended.
This appliance requires a standard
The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.
¾CONTROL PANEL
11