Promise Technology EX8650A, EX4650 SuperTrak Installation Task List, Unpacking Your SuperTrak

Step 1: Unpacking Your SuperTrak

SuperTrak Installation Task List

•Step 1: Unpacking Your SuperTrak, below

•Step 2: Installing the SuperTrak Card (page 4)

•Step 3: Choosing the Physical Drives (page 9)

•Step 4: Creating a Logical Drive (page 10)

•Step 5: Installing Software Drivers (page 14)

•Step 6: Installing WebPAM PRO (page 15)

•Step 7: Logging into WebPAM PRO (page 17)

•Step 8: Setting up WebPAM PRO (page 18)

Step 1: Unpacking Your SuperTrak

When you receive the SuperTrak EX SAS/SATA RAID Controller card, the package should contain the items listed below:

•SuperTrak EX4650, EX4650A, EX8650, or EX8650A Controller card

•Quick Start Guide

•0.5m (19-inch) SFF-8087 to SFF-8087 multi-lane cable One for EX4650 and EX4650A

Two for EX8650 and EX8650A

•CD with WebPAM PRO software, Windows and Linux drivers, and SuperTrak User Manual

If any of the items are missing or appear damaged, please contact your dealer or distributor immediately.

Warning

The electronic components on the SuperTrak EX Controller cards are sensitive to damage from Electro-Static Discharge (ESD). Observe appropriate precautions at all times when handling the SuperTrak card or its subassemblies.

Warning

Before installing the SuperTrak EX Controller card into an existing system, backup any important or useful data. Failure to follow this accepted practice could result in data loss.

3