Setup for VoIP Analog Adapter boxes
IMPORTANT NOTICE: The Aura SoHo™ Conference Phone has echo and noise cancellation which is optimized for ANALOG telephone lines (land lines). If you have a standard Analog phone line, the instructions on this sheet do not apply to you. Please proceed to page 10, Using the Aura SoHo™.
However, if your phone service is through a VoIP ANALOG ADAPTER, you will have to modify the settings on the Aura SoHo™ Conference Phone to maintain the call quality and use the proper echo and noise cancellation settings. If you have a VoIP Analog Adapter, your service could be from one of the following providers and have the following plan names:
Lingo - (Using a Linksys VoIP adapter) - Hello World Unlimited, Hello America Unlimited, Hello America 500, Hello America 250, Talk 365, Business Value Plan, Business Plus Plan, Business Premium
Vonage - (Using a
AT&T - (Using an AT&T VoIP adapter) -
Comcast Cable - (Using a VoIP phone adapter) - Comcast Unlimited, Local with More, Comcast HD Double Play, Comcast HD Triple Play, Comcast Digital Voice
If you think you might have a VoIP Analog Adapter but aren’t sure, please contact your provider. If you still need help, call Spracht directly for assistance at
To modify the settings on the Aura SoHo™ Conference Phone for a VoIP Analog Adapter Box
1.After you have followed the set up steps 1 through 6 on the previous pages (6 and 7), the unit will be ready after you hear the two tones.
8
Setup
2.Confirm the Aura SoHo™ Conference Phone is connected properly by pressing the Power button �. The keypad back light will go on and you will hear a dial tone. Wait for 5 seconds, then press the Power button � again to turn OFF the unit.
3.Next, you will be changing the Aura SoHo™ Conference Phone setting to VoIP mode. The unit should be in On Hook state, which means no dial tone, and the keypad back light will be off. Press these keys on the keypad: 1, 0, 1. The keypad backlight will go on and two tones will sound. Wait about 5 seconds; the keypad light will go off and then flash once. The unit is now switched over to VoIP mode and will stay in that setting the next time you turn the phone on.
4.You can now follow the User Guide instructions for making a call (page 10).
To change back to Analog Phone line mode
You will need to reset the internal counter again. Press the Power button �. The keypad back light will go on and you will hear a dial tone. Wait for 5 seconds, then press the Power button � again to turn OFF the unit.
The Aura SoHo™ Conference Phone should be in On Hook state, which means no dial tone, and the keypad back light will be off. Press these keys on the keypad: 1, 0, 0. The keypad backlight will go on and two tones will sound. Wait about 5 seconds; the keypad light will go off and then flash once. The unit is now switched back to Analog phone line and will stay in that setting the next time you turn the phone on.
9