AEG T500 Take-out laundry or put-in laundry when necessary, End of the drying process

Page 18

Drying

Take-out laundry or put-in laundry when necessary

You can interrupt the drying process at any time to take out some laundry or to put in more laundry.

0Open the fill-in door.

1 Caution!hot. The laundry and the drum may be

0Take out or put in some laundry.

0Close the fill-in door.

0Press the X START button to resume the drying process.

End of the drying process

The cooling phase starts shortly before the end of the drying process: The heater is switched-off during this phase. Actual drying also terminates with the cooling phase. The Z EMPTY WATER display will light up to indicate the end of the cooling phase.

After the cooling phase you can take the laundry out of the dryer.

The crease guard phase (approx. 30 mins.) follows automatically after the drying process. The drum rotates intermittently. This keeps your laundry loose and crease-free.

Take out the laundry

0Open the fill-in door and take out the laundry.

Switch-off the dryer

0Turn the program selector to the Y OFF position.

114

Image 18

Contents Lavatherm T500 Dear customer Please read these operating instructions through carefullyContent 121 1Safety instructions General safetySafety of children Utilisation in accordance with the intended purposeInstallation and connection General information Disposal Dispose of the packaging materialEnvironmental protection tips Pre-drying Drying processFill weight Duration Power Drying program Construction of the appliance Front viewOperator control mask Before the first drying process Program selector Brief operating instructions Open the fill-in door DryingPreparing the laundry Fill-in the laundryStart the drying program End of the drying process Take-out laundry or put-in laundry when necessarySwitch-off the dryer Take out the laundryEmpty the condensate container Clean the fluff filter Clean the condenserCare symbols R, Q fill-in quantity up to 5kg Program tablesCare symbols Small glossary of textile informationCleaning and maintenance Cleaning the condenserCleaning the filter area Clean the drumCleaning the panel and operating parts Troubleshooting Problem Possible cause RemedySet a different time Changing-over the door stop Special accessories Kit for external condensate drain-offKits Washing/drying column Technical data Power supplyInformation for the electrician Index Acrylate Acrylic AnorakService When do you incur costs even during the warranty period?