ADC SL20 Gen II manual Retain This Manual In a Safe Place For Future Reference

Page 2

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

 

Important

 

For your convenience, log the following information:

DATE OF PURCHASE

____________________________________________________ MODEL NO. SL20______________PH7

RESELLER’S NAME

_________________________________________________________________________________

Serial Number(s) _____________________________________________________________________________________

____________________________________________________________________________________________________

____________________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

Image 2
Contents SL20 Gen Retain This Manual In a Safe Place For Future Reference Table of Contents Phase 7.3 Non-Coin Top Panel Assembly For Top Control ModelsPhase 7.5 Non-Coin Top Panel Assembly Front Panel Assemblies Phase 7.5 Non-Coin Bottom Panel Assembly For Bottom Control ModelsPhase 7.3 Non-Coin Bottom Panel Assembly Phase 7.3 Coin Top Panel Assembly Phase 7.3 Coin Bottom Panel Assembly Main Door Assemblies Middle Front Panel Assembly Lint Drawer Assembly For Models Mfd. as of July 29For Models Mfd. prior to July 29 Tumbler Assembly For Models Mfd. as of MayFor Models Mfd. prior to May Rear Support Panel Assembly Refer to Temperature Sensor Assemblies onFront Tumbler Wheel Assemblies Rear Tumbler Wheel Assemblies Fire Suppression System Piping Assembly Temperature Sensor Assemblies Motor Drive Assembly Hot Surface Ignition Burner Assembly Direct Spark Ignition Burner Assembly 450599 Lint Box / Blower Motor Assembly Refer to Blower Assembly on Electric Oven Assembly Blower Assembly Blower Motor Assembly Front Electrical Panel Assembly Sail Switch Assembly Base / Top / Sides / Back Guard Assemblies Pedestal Box Option Additional Parts Available ADC Part No 2 10/23/08