ADC ADG-758 manual Retain This Manual In a Safe Place For Future Reference

Page 2

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

POUR VOTRE SÉCURITÉ

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

 

Important

 

For your convenience, log the following information:

 

ADG-758

DATE OF PURCHASE ___________________________ MODEL NO. __________________________________________

RESELLER’S NAME

______________________________________________________________________________________

Serial Number(s)

________________________________________________________________________________________

 

________________________________________________________________________________________

 

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

Image 2
Contents Parts Manual American Dryer CorporationRetain This Manual In a Safe Place For Future Reference Table of Contents Control Door Assembly Without Trim Control Door Assembly With Trim ADC LogoPhase 5 OPL Microprocessor Control Panel Assembly Phase 5 Coin Microprocessor Control Panel Assembly Refer to Microprocessor Coin Acceptors Listing onPhase 5 Coin and OPL Microprocessor Control Box Assembly Coin Vault Assembly 8Dual Timer Tap Touch Controls For Models Mfd. as of November 3Dual Timer Control Panel Assembly For Models Mfd. prior to November 3Dual Timer Control Box Assembly Front Panel Assembly for Plastic Door Plastic Main Door Assembly Main Door Switch Housing for Plastic Door Main Door Cold Rolled Steel CRS Assembly Main Door Switch Assembly Cold Rolled Steel CRS Door Cold Rolled Steel CRS Door Front Panel Basket Tumbler/Support Assemblies Drop Lint Door Assembly Without Trim Drop Lint Door Assembly With Trim For ALL Coin ModelsLint Trap Assembly Idler Bearing Assembly Basket Tumbler Bearing Assembly Basket Tumbler Bearing Assembly Non-Reversing T.E.F.C. Motor Mount Assembly Non-Reversing T.E.F.C. Motor Mount Assembly Reversing T.E.F.C. Motor Mount Assembly Reversing T.E.F.C. Motor Mount Assembly Sensor Bracket Assemblies Sensor Bracket Assemblies Direct Spark Ignition DSI Burner Assembly Direct Spark Ignition DSI Burner Assembly For Models Mfd. as of April 15For Models Mfd. prior to April 15 For Models Mfd. prior to April 15 Single-Phase 1Ø Motor, Electric Relay Panel Assembly Phase 3Ø Motor, Electric Relay Panel Assembly Microprocessor Reversing Rear Control Box Assembly Dual Timer Reversing Rear Control Box Assembly Outer Top/Back Guard Assemblies Single Coin Microprocessor Coin Acceptors ListingGAS Step Down Transformer Usage ListingAdditional Parts Available ADC 12/17/99-30 08/22/01-25 09/04/02-5 01/08/03-20