Amana W10572490A - SP manual Cycle Status Indicators, Additional Features, To use the drying rack

Page 10

CYCLE STATUS INDICATORS

The Cycle Status Indicators show the progress of a cycle.

Check Vent

This indicator will show the status of airflow through the dryer for the dryer’s life. During the sensing phase at the beginning of the cycle, the Check Vent light will come on if a blocked vent or low airflow issue is detected. This light will stay on for the entire cycle, but will turn off at the end

of the cycle. This feature is available during Automatic cycles only. For more information on maintaining good airflow, see “Check Your Vent System for Good Airflow.”

NOTE: If there are other error issues during a cycle, the Check Vent indicator will not light up. See “Troubleshooting” section.

Efficiency Monitor

The Efficiency Monitor allows you to see how the settings you select affect your energy usage within the cycle chosen. The Efficiency Monitor indicator may change, depending on the options and modifiers selected.

Wet

The load is still wet and/or the cycle just started.

Cool Down

The dryer has finished drying with heat, and is now tumbling the load without heat to cool it down and reduce wrinkling.

Done

This will indicate that the selected cycle has ended and the load may be removed from the dryer.

ADDITIONAL FEATURES

USING THE DRYING RACK

To obtain a drying rack for your dryer, order by calling 1-877-944-7566. You will need your model and serial number and the purchase date. Remove and discard any packing material before use.

Use the Drying Rack for items that you do not want to tumble dry, such as sweaters and tennis shoes. When you use the drying rack, the drum continues to turn, but the rack remains stationary.

The drying rack is intended for use with the Manual Dry/ Time Dry cycles only. The drying rack cannot be used with Automatic cycles.

To use the drying rack:

IMPORTANT: Do not remove the lint screen.

1.Open dryer door.

2.Align the two hooks on the front of the drying rack with the holes in the dryer door opening and press down fully into holes. Rest the rear support on the dryer back ledge.

3.Place wet items on top of the drying rack. Allow space around items for air to circulate. The drying rack does not move, but the drum will rotate; be sure to leave adequate clearance between items and the inside of the dryer drum. Make sure items do not hang over the edges or between drying rack grille.

4.Close the door.

5.Select a Time Dry/Air Only, or Low Temperature cycle. Items containing foam, rubber, or plastic must be dried on a clothesline or by using the Air Only setting.

6.When the cycle is selected, the Estimated Time Remaining display shows the default time. You can change the actual time in the cycle by increasing or decreasing the cycle time.

7.Start the dryer.

NOTE: Check the lint screen and remove any lint accumulated from items dried on the drying rack after the cycle is finished.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Use & Care Guide Guide d’utilisation et d’entretien W10562495A W10572490A SPTable of Contents Dryer Safety Table DE MatièresPage Stack Kit AccessoriesPedestal WorksurfaceCheck Your Vent System for Good Airflow Good airflowControl Panel and Features Cycle Guide Automatic Cycles Items to dry Cycle Drying Dryness Default Cycle DetailsCycle Drying Default Items to dry Cycle Guide Manual CyclesUsing Your Dryer Clean the lint screenAutomatic Cycles To change the drying settingsManual Cycles Additional Features Cycle Status IndicatorsTo use the drying rack Dryer Care For direct-wired dryers Reinstalling the DryerFor power supply cord-connected dryers Non-Use or Storage CareDryer Operation TroubleshootingIf you experience Possible Causes Solution Unusual NoiseTroubleshooting Dryer Displaying Code Message or Indicator Is Lit Whirlpool Corporation Laundry Warranty This limited warranty does not coverSécurité DE LA Sécheuse Page Ensemble de superposition AccessoiresPiédestal de Surface de travailCirculation d’air adéquate Bouton Power mise sous tension Tableau DE Commande ET CaractéristiquesBouton START/PAUSE mise en marche/pause Guide DE Programmes Programmes Automatiques Guide DE Programmes Programmes ManuelsUtilisation DE LA Sécheuse Nettoyer le filtre à charpieProgrammes automatiques Programmes manuelsTémoins Lumineux DE Programme Caractéristiques Supplémentaires Utilisation de la grille de séchageEntretien DE LA Sécheuse Précautions à prendre avant un déménagement Réinstallation de la sécheuseEntretien en cas de non-utilisation ou d’entreposage Sécheuses alimentées par cordon d’alimentationFonctionnement de la sécheuse DépannageSons inhabituels Résultats de la sécheuse Résultats de la sécheuse suite Message codé ou un témoin lumineux s’allume Page Page Garantie Limitée La présente garantie limitée ne couvre pasU.S.A W10562495AW10572490A SP U.S.A. and Canada

W10562495A, W10572490A - SP specifications

The Amana W10572490A and W10562495A are highly regarded appliance components designed for modern kitchens, offering exceptional features, technologies, and characteristics that enhance functionality and efficiency. These parts are primarily known for their reliable performance and compatibility with a wide range of Amana appliances.

One key feature of the Amana W10572490A is its design, which ensures seamless integration into various refrigerator models. This part serves as a crucial component in maintaining optimal cooling and preserving food freshness. The W10562495A complements this functionality, often associated with temperature regulation and internal airflow management, ensuring that the refrigerator operates efficiently.

Both parts are engineered with durability in mind. Constructed from high-quality materials, they can withstand the rigors of daily use, reducing the likelihood of wear and tear. This durability not only extends the lifespan of the appliance but also minimizes maintenance costs over time, making them cost-efficient choices for homeowners.

In terms of technology, the W10572490A boasts innovative features that contribute to energy efficiency. It helps in reducing energy consumption, which not only benefits the environment but also lowers utility bills. The W10562495A may include advanced sensing technology that allows for precise temperature adjustments, providing users with better control over their refrigeration needs.

Another characteristic worth noting is the user-friendly nature of these components. Both the W10572490A and W10562495A are designed for easy installation and replacement, allowing homeowners to manage minor repairs without the need for professional assistance. This accessibility empowers users to take charge of their appliance maintenance, ultimately leading to greater satisfaction.

In addition to practical functionality, these components align with Amana's commitment to sustainability. The company is focused on creating products that not only meet consumer needs but also adhere to environmental guidelines. This commitment is evident in the design and energy efficiency features of the W10572490A and W10562495A.

In conclusion, the Amana W10572490A and W10562495A stand out for their unique blend of durability, energy efficiency, and user-friendliness. As integral parts of Amana's appliance lineup, they contribute to improved performance and longevity, making them essential for any modern kitchen.
Top Page Image Contents