American Dryer Corp D75 manual Retain This Manual In a Safe Place For Future Reference

Page 2

Retain This Manual In A Safe Place For Future Reference

JLA products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. JLA reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

Important

For your convenience, log the following information:

DATE OF PURCHASE

____________________________________________________ MODEL NO.

______________D75

RESELLER’S NAME

_________________________________________________________________________________

Serial Number(s) _____________________________________________________________________________________

____________________________________________________________________________________________________

____________________________________________________________________________________________________

Replacement parts can be obtained from your reseller or JLA. When ordering replacement parts, you can FAX your order to JLA at 01422 824390 or telephone your order directly to the JLA Parts Department at 01422 822282. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

Image 2
Contents D75 Parts Manual Retain This Manual In a Safe Place For Future Reference Table of Contents Control Door Assembly For Models Mfd. as of July 10For Models Mfd. prior to July 10 Phase 7 OPL Microprocessor Control Panel Assembly Phase 7 OPL Microprocessor Control Box Assembly Front Panel Assembly Refer to Lint Drawer / Lint Drawer Switch Assembly on37-1/4 Main Door Assembly For Models Mfd. as of September 1125-1/2 Main Door Assembly For Models Mfd. prior to September 11Main Door Switch Assembly Main Door Switch Assembly Tumbler / Support Assemblies Lint Drawer / Lint Drawer Switch Assembly Idler Bearing Assembly Tumbler Bearing Assembly Taper Lock Bushing for reversing models Only Non-Reversing Motor Mount Assembly Non-Reversing Motor Mount Assembly Reversing T.E.F.C. Motor Mount Assembly Reversing T.E.F.C. Motor Mount Assembly Sensor Bracket Assemblies Microprocessor Sensor Bracket Assembly Complete Direct Spark Ignition Burner Assembly Direct Spark Ignition Burner Assembly Hot Surface Ignition Burner Assembly Refer to Sail Switch Assembly on Air-Operated Steam Damper Assembly Steam Damper Gasket sold by the inch Electric Oven Assembly Consult factory for wiring harness required Sail Switch Assembly Rear Electric Relay Panel Assembly Reversing Electric Relay Panel Assembly 450592 F.E. Temperature Probe Assembly F.E. Solenoid and Piping Assembly Outer Top / Back Guard Assemblies For Models Mfd. as of January 5For Models Mfd. prior to January 5 Microprocessor Electric Oven Component Application Chart AssemblyAdditional Parts Available 01/28/08