American Dryer Corp ADG-531HS manual Fan Impellor/Idler Bearing Assemblies

Fan (Impellor)/Idler Bearing Assemblies	21
For 60 Hz Models ONLY

Illus. No.	Part No.	Qty.	Description
1	100701	1	3/16” x 3/16” x 1” Key
2	101206	1	2.8 OD x 5/8” ID Pulley
3	152002	4	1/4-20 Hex Nut
4	153007	4	1/4” Lock Washer
5	154324	4	#10-32 x 1/4” Cone Point Setscrew
6	881361	2	5/8” Flange Bearing
7	881225	1	(Fan) Impellor Bearing Mount ONLY
8	101129	1	9” Pulley
9	154301	2	5/16-18 x 1” Allen (cone point) Setscrew
10	100705	1	3/16” x 3/16” x 1-3/8” Key
11	301850	1	Idler Shaft
12	150529	3	1/4-20 x 2-1/4” Carriage Bolt
13	---------	4	Flanges (part of Part No. 100214 bearing)
14	880214	2	5/8” Flange Bearing
15	150617	2	3/8-16 x 1” Hex Head Machine Bolt
16	153005	2	3/8” Lock Washer
17	153004	2	3/8” Flat Washer
18	152020	1	5/16-18 Square Nut
19	152004	1	5/16-18 Hex Nut
20	150509	1	5/16-18 x 3” Hex Head Machine Bolt
21	882776	1	Steel Idler Assembly Complete
			(includes illus. nos. 10 through 23)
22	153007	3	1/4” Lock Washer
23	152002	3	1/4-20 Hex Nut
24	881226	1	Fan Mount ONLY
			(includes illus. no. 33)
25	153004	4	3/8” Flat Washer
26	153005	4	3/8” Lock Washer
27	150508	4	3/8-16 x 3/4” Hex Head Machine Bolt
28	153050	3 or 4	1/2” x 1-1/16” Flat Washer
29	100604	1	12.5 Fan (impellor)
30	100723	1	1/8” x 1/8” x 1-3/8” Key
31	152006	2	1/2-20 Left-Hand Jam Nut
32	353111	1	Fan Shaft
33	117604	3	Noise Suppression Tape (sold by the foot)
34	116011	1	3-1/2” x 4” Felt Bearing Seal

Telephone: (508) 678-9000 Fax: (508) 678-9447