American Dryer Corp ML-758 manual Retain This Manual In a Safe Place For Future Reference

Page 2

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

 

Important

 

For your convenience, log the following information:

DATE OF PURCHASE

____________________________________________________ MODEL NO. ______________ML-758

RESELLER’S NAME

_________________________________________________________________________________

Serial Number(s) _____________________________________________________________________________________

____________________________________________________________________________________________________

____________________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

Image 2
Contents ML-758 Parts Manual Retain This Manual In a Safe Place For Future Reference Table of Contents Phase 7 Non-Coin Microprocessor Control Door Assembly For Models Mfd. as of July 10Dual Timer Non-Coin Control Door Assembly For Models Mfd. prior to July 10 Dual Timer Control Door Assembly Phase 7 Non-Coin Microprocessor Control Panel Assembly Dual Timer Tap Touch Controls Phase 7 Non-Coin Microprocessor Control Box Assembly Dual Timer Control Box Assembly 37-1/4 Main Door Assembly Main Door Switch Assembly Front Panel Assembly Refer to Lint Drawer / Lint Drawer Switch Assembly onLint Drawer / Lint Drawer Switch Assembly Tumbler / Support Assemblies Tumbler Bearing Assembly For Models with Setscrew Type BearingsFor Models with Grip Lock Type Bearings Idler Bearing Assembly Non-Reversing Motor Mount Assembly Specify voltage when ordering Reversing T.E.F.C. Motor Mount Assembly Specify voltage when ordering As required Sensor Bracket Assemblies Includes illus. nos through Direct Spark Ignition Burner Assembly Direct Spark Ignition Burner Assembly Electric Oven Assembly Electric Oven Assembly Air-Operated Steam Damper Assembly Fire Suppression System Assemblies Quantity is 1 for 115v and 2 for Page 460-480V Microprocessor Rear Electric Relay Panel Assembly Page Page Includes illus. nos through 4 and 6 through 460-480V Dual Timer Rear Electric Relay Panel Assembly Page Outer Top / Back Guard Assemblies For Models Mfd. as of January 5For Models Mfd. prior to January 5 Microprocessor Electric Oven Component Application Chart Dual Timer Electric Oven Component Application Chart Additional Parts Available 450566-3 ADC Part No 04/17/08