American Dryer Corp ML-190 manual Retain This Manual In a Safe Place For Future Reference

Page 2

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

 

Important

 

For your convenience, log the following information:

DATE OF PURCHASE

____________________________________________________ MODEL NO. ______________ML-190

RESELLER’S NAME

_________________________________________________________________________________

Serial Number(s) _____________________________________________________________________________________

____________________________________________________________________________________________________

____________________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

Image 2
Contents ML-190 Retain This Manual In a Safe Place For Future Reference Table of Contents Control Door Assembly Microprocessor Control Panel Assembly Front Panel / Main Door Assemblies Main Door Switch Tumbler Assembly Lint Door Assembly Lint Drawer / Lint Drawer Switch Box Assemblies Rear Wheel and Tumbler Support Assembly For Models Mfd. as of March 31Tumbler Bearing / Rotational Sensor Assemblies For Models Mfd. prior to March 31Idler Shaft Assembly Drive Shaft Assembly Speed Reducer Shaft Assembly Microprocessor Temperature Sensor Bracket Assembly Totally Enclosed, Non-Venting Drive Motor Assembly Blower Motor Mount Assembly Fan Squirrel Cage Shaft Mount Assembly Direct Spark Ignition Gas Burner Assembly Refer to Sail Switch Assembly on Hot Surface Ignition Burner Assembly Hot Surface Ignition Burner Assembly Sail Switch Assembly Steam Damper Assembly Top Console Assembly Pneumatic Valve Assembly For Gas Models onlyFor Steam Models only Air Jet Assembly Microprocessor Reversing Contactor Mounting Panel Assembly Illus. No Back Guard Assemblies Back Guard Assemblies ADC Part No 6 08/13/08