Maytag MD9606, MD9706 warranty Before You Call

Before You Call ....

Check these )oints if your clothes dr' ,er...

•Be sure the door is latched shut.

•Be sure the power cord is plugged into a live electrical outlet.

Doesn't Run	•	Check		the home's	circuit breaker	and fuses.
	•	Press the START button again if the door is opened during					the cycle.
• ,	•*...,		.oo .. ••, •		,,• ,, • • • •	• • •. ••, •• ,• •o ••	••• to to •• •,• •. •.
	•	Check		the home's	circuit breaker	and fuses.

Doesn't Heat• Select a heat setting, not air-fluff.

•On a gas dryer, check that the gas supply is on.

•Clean the lint filter and exhaust duct.

•Check all of the above, plus...

•Be sure the exhaust hood at the outside of the home can open and close freely.

•Use 4" rigid metal exhaust duct.

Doesn't Dry• Do not overload. 1 Wash load = 1 Dryer load.

• Sort heavy items from lightweight items.

°Check that the washer is draining properly to extract adequate water from the load.

•Check the load for objects such as coins, loose buttons, nails, etc. Remove promptly.

Is Noisy

•Be sure the dryer is leveled properly as outlined in the installation manual.

•Be sure the rubber feet are installed on the leveling legs.

• • •, t• ... • • • • . ••	•o, ••• •	• •.	• t* •• 6• •• o• o.• •• t•.	••, _,• ••• •.• 6o• .•• •. o• •. •••
	• This is normal operation for an IntelliDry cycle, especially at the beginning of
Control Knob	cycle. Once the load begins to dry, the control knob will start to advance. The
	rate of advancement will be slow at the beginning of the cycle because there is
Advances Slowly	more	moisture	in the load. As the load becomes	more dry, the control knob will
	advance more quickly.

For further assistance, call Maytag Customer Assistance: U.S. 1-800-688-9900 or Canada 1.800-688-2002.

U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1.800-688-2080.

10