Maytag MD6400 Control Panel, Cabinet, Tumbler, Dryer Exhaust System, Drying Rack Tips

Page 7

Drying Rack Tips

 

SUGGESTED

SUGGESTED ITEMS

TEMPERATURE

SETTINGS

 

 

Washable sweaters (block to

Heat

shape and lay flat on rack)

 

 

 

Stuffed toys or pillows (cotton

Heat

or polyester fiber filled)

 

Stuffed toys*

Air Fluff

(foam or rubber filled)

 

Foam rubber pillows*

Air Fluff

Sneakers

Air Fluff or Heat

Note: If not included with your dryer, contact your Maytag dealer for the accessory kit MAL1000AXX or call 1-877-232-6771 USA and 1-800-688-8404 Canada.

WARNING

*WARNING – When drying foam rubber, plastic or rubber with heat, it is possible they will suffer damage and could lead to a fire hazard.

Care & Cleaning

Control Panel

Clean with a soft, damp cloth. Do not use abrasive substances.

Cabinet

Wipe off any marks with soap and water. Use an appliance wax once a year if desired.

Tumbler

Remove any stains such as crayon, ink pen or fabric dye from new items (such as towels or jeans) with an all-purpose cleaner. Then tumble clean old towels or rags to remove any excess stain or cleaning substance. Once these steps are done, stains may still be visible, but should not transfer to subsequent loads.

Dryer Exhaust System

Inspect and clean once a year to maintain optimum performance. The outside exhaust hood should be cleaned more frequently to ensure proper operation. (Refer to the Installation Instructions for

more information.)

6

Image 7
Contents MD6400 Table of ContentsWhat You Need to Know About Safety Instructions Important Safety InstructionsRecognize Safety Symbols, Words, Labels Save These Instructions End of Cycle Signal Using the Controls Select Temperature Select SignalPull the Control Dial out to Start Select CycleLoad the Dryer Properly Clean the Lint FilterUsing the Drying Rack Drying RackDryer Exhaust System Control PanelCabinet TumblerImportant Avoid Dryer Drying Special Laundry TipsDon’t Dryer Exhaust TipsService Information Troubleshooting