Maytag MD6200 warranty Controlsataglance, Autodry

CONTROLSATAGLANCE

SELECTCYCLE

AUTODRY WRINKLE FREE FABRICS with

PRESS CARE is designed for permanent press or man-

madefabrics such as acrylic, nylon, polyesteror blends. It min- imizes wrinkling by providing an unheated cool down period at

the end of the cycle. Simply set the control to the desired dry- ness level (more dry - less dry). The line between MOREor

LESS DRY is the initial preferred setting for the majority of

loads.

COOL DOWN

LESS DRY

AUTODRY

AUTODRY REGULAR is designed for loads such as towels, underwear, t-shirts, jeans, etc. Set the control to the desired dryness level (more dry - less dry). The line between MOREor LESS DRY is the initial preferred setting for the majority of loads.

		ALITODRY
OFF	MORE DRY	R EG U LAR
		LESS DRY
		OFF

WRINKLE	FREE		r6o
FABRICS
WITH PRESS	CARE	DRY	5O
	MORE
		OFF	4O
			TIME DRY/

I030

WRINKLE RELEASE DAMP DRY

AIR FLU FF

WRINKLE RELEASE will release

wrinkles from items that are clean and dry but slightly wrinkled, such as from a crowded closet, packed suitcase or from sitting in the dryer too long after the end of the cycle. It provides 10 minutes of heated tumbling and

5 minutes of cool down tumbling without heat.

DAMP DRYisdesignedto "partially"

dry items. It provides approximately 20 minutes of heated tumbling and 5 min- utes of cool down tumbling without heat.

TIME DRY/AIRFLUFFmaybe

selected for any load if the AutoDry

sensor system is not used. Set the control to the desired number of

minutes.

NOTE:1

S