Maytag MLG33 Preoperational Test, Preoperational Instructions, Coin Models, Shutdown Instructions

Page 18

Preoperational Test ___________________

All dryers are thoroughly tested and inspected before leaving the factory. However, a preoperational test should be performed before the dryer is publicly used. It is possible that adjustments have changed in transit or due to marginal location (installation) conditions.

Turn on electric power to the dryer.

Refer to the Operating Instructions for starting your particular model dryer.

Gas Dryers

Open all shutoff valves.

When a gas dryer is first started (during initial start-up), it has a tendency not to ignite on the first ignition attempt. This is because the gas supply piping is filled with air, so it may take a few minutes for the air to be purged from the lines.

Note

!During the purging period, check to be sure that all gas shutoff valves are open.

A gas pressure test should be taken at the gas valve pressure tap of each dryer to ensure that the water column pressure is correct and consistent.

Note

!Water column pressure requirements (measured at the pressure tap of the gas valve body) must be

verified.

Important

!In most cases there is no regulator provided in an L.P. dryer. The water column pressure must be

regulated at the source (L.P. tank), or an external regulator must be added to each dryer.

Safety Related Circuits

Make a complete operational check of all safety related circuits:

•Door Switch(es)

•Hi-Limit Thermostats

•Sail Switch

Make a complete operational check of all operating controls.

Tumbler Coating

The tumbler is treated with a protective coating. We suggest dampening old garments or cloth material with a solution of water and nonflammable mild detergent and tumbling them in the tumbler to remove this coating.

Microprocessor Programs/Selections

Each microprocessor controller (computer) has been preprogrammed by the factory with the most commonly used parameter (program) selections. If computer program changes are required, refer to the computer programming manual which was shipped with the dryer.

Preoperational Instructions __________

Important

!For more detailed information regarding the microprocessor controller (computer), refer to the

microprocessor user’s manual included with the dryer.

Coin Models

Microprocessor Controller (Computer)

When the microprocessor controller (computer) is in the ready state, the L.C.D. screen will display “To Start Insert $XX.XX”.

Insert coin(s). Once the correct “Amount to Start” has been inserted, the L.C.D. will display “Select Cycle”.

Select temperature by pressing WHITES / COLORS, PERM PRESS, OR DELICATES. The cycle will start and the L.C.D. will display the Dry Cycle selected and the remaining time.

The dryer will continue through the drying and cooling cycles, until the vended time has expired.

Note

!To stop the dryer, open main door. Continuation of the cycle will resume only after the door has been

closed and any one of the 3 temperature selections is pressed.

Shutdown Instructions ________________

If the dryer is to be shutdown (taken out of service) for a period of time, the following must be performed:

Discontinue power to the dryer either at the external disconnect switch or the circuit breaker.

Discontinue the heat supply:

Gas Models – Discontinue the gas supply. Shut off external gas supply shutoff valve.

Shut off internal gas supply shutoff valve located in the gas valve burner area.

Service/Parts Information ____________

Service

Service must be performed by a qualified trained technician, service agency, or gas supplier. If service is required, contact the Maytag distributor from whom the equipment was purchased. If the distributor cannot be contacted or is unknown, contact the Maytag Co. for a distributor in your area.

Note

!When contacting the Maytag Co., be sure to give them the correct model number and serial

number so that your inquiry is handled in an expeditious manner.

Parts

Replacement parts should be purchased from the distributor from whom the Maytag equipment was purchased. If the distributor cannot be contacted or is unknown, contact the Maytag Co. for a distributor in your area.

18

Maytag Co.

113413 - 10

Page 17 Page 19
Image 18
Page 17 Page 19
Contents MLG33 MLG33 Table of Contents Safety Precautions What To Do If You Smell GasCE only Specifications GasSpecifications Location Requirements Installation ProceduresUnpacking/Setting Up Dryer Enclosure RequirementsFresh Air Supply Requirements Exhaust RequirementsOutside Ductwork Protection Single Dryer VentingMultiple Dryer Common Venting Electrical Information Electrical RequirementsGas Information CE Dryers Gas ConnectionsGas Specifications for CE Approved Dryers Conversion from Natural Gas to Propane or Butane Gas Converting from One Family Gas to AnotherPiping/Connections Parts Required for ConversionRegulated Gas Valve Non-CE DryersUnregulated Gas Valve Conversion from Propane or Butane Gas to Natural GasGas Pressure Test Procedure Gas Pressure TestingGas Pressure Adjustment Preparation for Operation/Start-UpPreoperational Instructions Service/Parts InformationPreoperational Test Coin ModelsWarranty Information Routine MaintenanceData Label Information Standard Label CE LabelMaytag Co 10 08/07/08

MLG33 specifications

The Maytag MLG33 is a versatile and reliable washer dryer combo designed for those seeking efficient laundry solutions without compromising on performance. This model stands out for its unique blend of features and advanced technologies, making it an ideal choice for households with limited space.

One of the most notable characteristics of the MLG33 is its compact design, which allows it to fit seamlessly into smaller laundry areas without sacrificing capacity. With a generous wash capacity of 3.5 cu. ft., the MLG33 can handle a significant amount of laundry, accommodating everything from everyday clothes to larger items like bedding. This is particularly beneficial for urban residences or homes where space is at a premium.

The Maytag MLG33 is equipped with several cutting-edge technologies aimed at enhancing cleaning efficiency and fabric care. The PowerWash cycle uses a combination of powerful cleaning actions, including an extra wash action and a thorough rinse, to remove tough stains and ground-in dirt from clothes. This feature ensures that each load comes out impeccably clean, giving you peace of mind knowing that your laundry is being treated with utmost care.

Another essential feature is the dryer’s moisture sensing technology, which automatically detects when your clothes are dry and stops the cycle, thereby preventing over-drying. This not only saves energy but also helps to prolong the life of your garments by preventing excessive wear and tear.

Additionally, the MLG33 boasts a range of settings tailored to different fabric types, providing users with the flexibility to select the optimal cycle for their laundry needs. From delicate fabrics to heavy-duty loads, this model adapts accordingly to ensure the best possible results.

Ease of use is another standout aspect of the MLG33. The intuitive controls and large dial make it easy to navigate through various cycle options, while the clear digital display provides real-time updates on the washing and drying process.

Durability is a hallmark of the Maytag brand, and the MLG33 is no exception. Constructed with high-quality materials and components, it is designed to endure the rigors of everyday use, backed by a solid warranty that reflects the company's commitment to long-lasting performance.

In summary, the Maytag MLG33 washer dryer combo is an excellent choice for those seeking a reliable, efficient, and compact laundry solution. With its advanced features, thoughtful design, and proven durability, it delivers exceptional cleaning results while optimizing space in any home.
Top Page Image Contents